Mass application rate.
Short tons per Hectare to Pounds per Square Meter Converter — ton/ha to lb/m2
Convert Short ton per Hectare (ton/ha) to Pound per Square Meter (lb/m2) using the exact conversion factor (1 short ton per hectare = 0.2 pound per square meter). See the formula, worked examples, and conversion table.
Short tons per Hectare to Pounds per Square Meter converter
Converter
Agriculture Converter
Convert acres, hectares, yield, seed, fertilizer, irrigation, and application-rate units.
Context values
Some unit families need one extra value for a physically accurate result.
Mass application rate.
Result = input x 0.090718474 / 0.45359237.
Mass Application Rate units are compatible.
Reserved above the conversion cards and below the converter.
About Converting Short tons per Hectare to Pounds per Square Meter
Short ton per Hectare and Pound per Square Meter both measure a farming-related quantity — a land area or an application/yield rate per unit area — used to report crop yields, calculate how much fertilizer or seed a field needs, and plan irrigation. Both are mass application rate units.
Formula
pounds per square meter = short tons per hectare × 0.2
This factor comes from each unit's defined relationship to the category's base unit: 1 short ton per hectare equals 0.090718474 base units, and 1 pound per square meter equals 0.45359237 base units, so dividing one by the other gives the direct short ton per hectare-to-pound per square meter factor of 0.2.
Simple example
1 ton/ha × 0.2 = 0.2 lb/m2
1 short ton per hectare = 0.2 pounds per square meter.
Real-world example
100 ton/ha × 0.2 = 20 lb/m2
100 short tons per hectare = 20 pounds per square meter.
Conversion table
| Short ton per Hectare (ton/ha) | Pound per Square Meter (lb/m2) |
|---|---|
| 1 ton/ha | 0.2 lb/m2 |
| 5 ton/ha | 1 lb/m2 |
| 10 ton/ha | 2 lb/m2 |
| 50 ton/ha | 10 lb/m2 |
| 100 ton/ha | 20 lb/m2 |
| 500 ton/ha | 100 lb/m2 |
Reverse conversion: Pound per Square Meter to Short ton per Hectare
0.2 lb/m2 × 5 = 1 ton/ha
0.2 pounds per square meter = 1 short ton per hectare.
short tons per hectare = pounds per square meter × 5
For a page dedicated to this direction, see Pound per Square Meter to Short ton per Hectare.
Understanding the Short ton per Hectare (ton/ha)
Mass application rate.
Understanding the Pound per Square Meter (lb/m2)
Mass application rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many pounds per square meter are in 1 short ton per hectare?
1 short ton per hectare equals 0.2 pounds per square meter, using the exact defined conversion factor rather than an estimate.
How do I convert short ton per hectare to pound per square meter?
Multiply the short ton per hectare value by 0.2. The converter above does this instantly to whatever precision you set.
How do I convert pound per square meter back to short ton per hectare?
Use the reverse factor: 1 pound per square meter equals 5 short tons per hectare. You can also use the swap control in the converter above to flip the direction instantly.
What is a short ton per hectare?
Short ton per Hectare (ton/ha) is a unit of agriculture.
What is a pound per square meter?
Pound per Square Meter (lb/m2) is a unit of agriculture.
Is the short ton per hectare to pound per square meter conversion exact?
Yes. Both short ton per hectare and pound per square meter are defined by fixed standards rather than physical artifacts, so the factor of 0.2 used above is exact to as many digits as you choose to display.
What's the difference between a yield rate and an application rate?
A yield rate describes how much of a crop is harvested per unit of land area (for example, tonnes per hectare). An application rate describes how much of an input like fertilizer or seed is applied per unit of land area. Both are commonly expressed using the same kind of mass-per-area units.