Mass application rate.
Short tons per Square mile to Milligrams per Square foot Converter — ton/mi2 to mg/ft2
Convert Short ton per Square mile (ton/mi2) to Milligram per Square foot (mg/ft2) using the exact conversion factor (1 short ton per square mile = 32.54077494 milligram per square foot). See the formula, worked examples, and conversion table.
Short tons per Square mile to Milligrams per Square foot converter
Converter
Agriculture Converter
Convert acres, hectares, yield, seed, fertilizer, irrigation, and application-rate units.
Context values
Some unit families need one extra value for a physically accurate result.
Mass application rate.
Result = input x 0.0003502659863 / 1.07639104e-5.
Mass Application Rate units are compatible.
Reserved above the conversion cards and below the converter.
About Converting Short tons per Square mile to Milligrams per Square foot
Short ton per Square mile and Milligram per Square foot both measure a farming-related quantity — a land area or an application/yield rate per unit area — used to report crop yields, calculate how much fertilizer or seed a field needs, and plan irrigation. Both are mass application rate units.
Formula
milligrams per square foot = short tons per square mile × 32.5407749369
This factor comes from each unit's defined relationship to the category's base unit: 1 short ton per square mile equals 0.000350265986311 base units, and 1 milligram per square foot equals 0.0000107639104167 base units, so dividing one by the other gives the direct short ton per square mile-to-milligram per square foot factor of 32.5407749369.
Simple example
1 ton/mi2 × 32.54077494 = 32.54077494 mg/ft2
1 short ton per square mile = 32.54077494 milligrams per square foot.
Real-world example
100 ton/mi2 × 32.54077494 = 3,254.077494 mg/ft2
100 short tons per square mile = 3,254.077494 milligrams per square foot.
Conversion table
| Short ton per Square mile (ton/mi2) | Milligram per Square foot (mg/ft2) |
|---|---|
| 1 ton/mi2 | 32.54077494 mg/ft2 |
| 5 ton/mi2 | 162.7038747 mg/ft2 |
| 10 ton/mi2 | 325.4077494 mg/ft2 |
| 50 ton/mi2 | 1,627.038747 mg/ft2 |
| 100 ton/mi2 | 3,254.077494 mg/ft2 |
| 500 ton/mi2 | 16,270.38747 mg/ft2 |
Reverse conversion: Milligram per Square foot to Short ton per Square mile
32.54077494 mg/ft2 × 0.03073067565 = 1 ton/mi2
32.54077494 milligrams per square foot = 1 short tons per square mile.
short tons per square mile = milligrams per square foot × 0.0307306756505
For a page dedicated to this direction, see Milligram per Square foot to Short ton per Square mile.
Understanding the Short ton per Square mile (ton/mi2)
Mass application rate.
Understanding the Milligram per Square foot (mg/ft2)
Mass application rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many milligrams per square foot are in 1 short ton per square mile?
1 short ton per square mile equals 32.54077494 milligrams per square foot, using the exact defined conversion factor rather than an estimate.
How do I convert short ton per square mile to milligram per square foot?
Multiply the short ton per square mile value by 32.54077494. The converter above does this instantly to whatever precision you set.
How do I convert milligram per square foot back to short ton per square mile?
Use the reverse factor: 1 milligram per square foot equals 0.0307306757 short tons per square mile. You can also use the swap control in the converter above to flip the direction instantly.
What is a short ton per square mile?
Short ton per Square mile (ton/mi2) is a unit of agriculture.
What is a milligram per square foot?
Milligram per Square foot (mg/ft2) is a unit of agriculture.
Is the short ton per square mile to milligram per square foot conversion exact?
Yes. Both short ton per square mile and milligram per square foot are defined by fixed standards rather than physical artifacts, so the factor of 32.54077494 used above is exact to as many digits as you choose to display.
What's the difference between a yield rate and an application rate?
A yield rate describes how much of a crop is harvested per unit of land area (for example, tonnes per hectare). An application rate describes how much of an input like fertilizer or seed is applied per unit of land area. Both are commonly expressed using the same kind of mass-per-area units.