Mass application rate.
Short tons per Square mile to Short tons per Square Meter Converter — ton/mi2 to ton/m2
Convert Short ton per Square mile (ton/mi2) to Short ton per Square Meter (ton/m2) using the exact conversion factor (1 short ton per square mile = 3.861022e-7 short ton per square meter). See the formula, worked examples, and conversion table.
Short tons per Square mile to Short tons per Square Meter converter
Converter
Agriculture Converter
Convert acres, hectares, yield, seed, fertilizer, irrigation, and application-rate units.
Context values
Some unit families need one extra value for a physically accurate result.
Mass application rate.
Result = input x 0.0003502659863 / 907.18474.
Mass Application Rate units are compatible.
Reserved above the conversion cards and below the converter.
About Converting Short tons per Square mile to Short tons per Square Meter
Short ton per Square mile and Short ton per Square Meter both measure a farming-related quantity — a land area or an application/yield rate per unit area — used to report crop yields, calculate how much fertilizer or seed a field needs, and plan irrigation. Both are mass application rate units.
Formula
short tons per square meter = short tons per square mile × 3.861022e-7
This factor comes from each unit's defined relationship to the category's base unit: 1 short ton per square mile equals 0.000350265986311 base units, and 1 short ton per square meter equals 907.18474 base units, so dividing one by the other gives the direct short ton per square mile-to-short ton per square meter factor of 3.861022e-7.
Simple example
1 ton/mi2 × 3.861022e-7 = 3.861022e-7 ton/m2
1 short ton per square mile = 3.861022e-7 short tons per square meter.
Real-world example
100 ton/mi2 × 3.861022e-7 = 0.0000386102 ton/m2
100 short tons per square mile = 0.0000386102 short tons per square meter.
Conversion table
| Short ton per Square mile (ton/mi2) | Short ton per Square Meter (ton/m2) |
|---|---|
| 1 ton/mi2 | 3.861022e-7 ton/m2 |
| 5 ton/mi2 | 0.0000019305 ton/m2 |
| 10 ton/mi2 | 0.000003861 ton/m2 |
| 50 ton/mi2 | 0.0000193051 ton/m2 |
| 100 ton/mi2 | 0.0000386102 ton/m2 |
| 500 ton/mi2 | 0.0001930511 ton/m2 |
Reverse conversion: Short ton per Square Meter to Short ton per Square mile
3.861022e-7 ton/m2 × 2589988.11 = 1.000000107 ton/mi2
3.861022e-7 short tons per square meter = 1.000000107 short tons per square mile.
short tons per square mile = short tons per square meter × 2589988.11034
For a page dedicated to this direction, see Short ton per Square Meter to Short ton per Square mile.
Understanding the Short ton per Square mile (ton/mi2)
Mass application rate.
Understanding the Short ton per Square Meter (ton/m2)
Mass application rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many short tons per square meter are in 1 short ton per square mile?
1 short ton per square mile equals 3.861022e-7 short tons per square meter, using the exact defined conversion factor rather than an estimate.
How do I convert short ton per square mile to short ton per square meter?
Multiply the short ton per square mile value by 3.861022e-7. The converter above does this instantly to whatever precision you set.
How do I convert short ton per square meter back to short ton per square mile?
Use the reverse factor: 1 short ton per square meter equals 2,589,988.11 short tons per square mile. You can also use the swap control in the converter above to flip the direction instantly.
What is a short ton per square mile?
Short ton per Square mile (ton/mi2) is a unit of agriculture.
What is a short ton per square meter?
Short ton per Square Meter (ton/m2) is a unit of agriculture.
Is the short ton per square mile to short ton per square meter conversion exact?
Yes. Both short ton per square mile and short ton per square meter are defined by fixed standards rather than physical artifacts, so the factor of 3.861022e-7 used above is exact to as many digits as you choose to display.
What's the difference between a yield rate and an application rate?
A yield rate describes how much of a crop is harvested per unit of land area (for example, tonnes per hectare). An application rate describes how much of an input like fertilizer or seed is applied per unit of land area. Both are commonly expressed using the same kind of mass-per-area units.