Mass per volume density.
Drams per Cubic foot to Short tons per Gallon Converter — dr/ft3 to ton/gal
Convert Dram per Cubic foot (dr/ft3) to Short ton per Gallon (ton/gal) using the exact conversion factor (1 dram per cubic foot = 2.610948e-7 short ton per gallon). See the formula, worked examples, and conversion table.
Drams per Cubic foot to Short tons per Gallon converter
Converter
Density Converter
Convert thousands of mass-per-volume density combinations for science, engineering, agriculture, and fluids.
Context values
Some unit families need one extra value for a physically accurate result.
Mass per volume density.
Result = input x 0.06257212255 / 239652.8546.
Density uses kilograms per cubic meter as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Drams per Cubic foot to Short tons per Gallon
Dram per Cubic foot and Short ton per Gallon both measure density — mass per unit volume — a property used to identify materials, check manufacturing quality, and predict whether something floats or sinks. As a fixed reference point, water has a density of exactly 1000 kg/m³ (1 g/cm³, 1 g/mL) at its temperature of maximum density, which is why many density figures in science and engineering are quoted relative to water. Both are mass per volume density units.
Formula
short tons per gallon = drams per cubic foot × 2.610948e-7
This factor comes from each unit's defined relationship to the category's base unit: 1 dram per cubic foot equals 0.0625721225545 base units, and 1 short ton per gallon equals 239652.854634 base units, so dividing one by the other gives the direct dram per cubic foot-to-short ton per gallon factor of 2.610948e-7.
Simple example
1 dr/ft3 × 2.610948e-7 = 2.610948e-7 ton/gal
1 dram per cubic foot = 2.610948e-7 short tons per gallon.
Real-world example
1,000 dr/ft3 × 2.610948e-7 = 0.0002610948 ton/gal
1,000 drams per cubic foot = 0.0002610948 short tons per gallon.
Conversion table
| Dram per Cubic foot (dr/ft3) | Short ton per Gallon (ton/gal) |
|---|---|
| 0.1 dr/ft3 | 2.610948e-8 ton/gal |
| 1 dr/ft3 | 2.610948e-7 ton/gal |
| 10 dr/ft3 | 0.0000026109 ton/gal |
| 100 dr/ft3 | 0.0000261095 ton/gal |
| 1,000 dr/ft3 | 0.0002610948 ton/gal |
| 10,000 dr/ft3 | 0.0026109484 ton/gal |
Reverse conversion: Short ton per Gallon to Dram per Cubic foot
2.610948e-7 ton/gal × 3830025.974 = 0.9999998657 dr/ft3
2.610948e-7 short tons per gallon = 0.9999998657 drams per cubic foot.
drams per cubic foot = short tons per gallon × 3830025.97403
For a page dedicated to this direction, see Short ton per Gallon to Dram per Cubic foot.
Understanding the Dram per Cubic foot (dr/ft3)
Mass per volume density.
Understanding the Short ton per Gallon (ton/gal)
Mass per volume density.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many short tons per gallon are in 1 dram per cubic foot?
1 dram per cubic foot equals 2.610948e-7 short tons per gallon, using the exact defined conversion factor rather than an estimate.
How do I convert dram per cubic foot to short ton per gallon?
Multiply the dram per cubic foot value by 2.610948e-7. The converter above does this instantly to whatever precision you set.
How do I convert short ton per gallon back to dram per cubic foot?
Use the reverse factor: 1 short ton per gallon equals 3,830,025.974 drams per cubic foot. You can also use the swap control in the converter above to flip the direction instantly.
What is a dram per cubic foot?
Dram per Cubic foot (dr/ft3) is a unit of density.
What is a short ton per gallon?
Short ton per Gallon (ton/gal) is a unit of density.
Is the dram per cubic foot to short ton per gallon conversion exact?
Yes. Both dram per cubic foot and short ton per gallon are defined by fixed standards rather than physical artifacts, so the factor of 2.610948e-7 used above is exact to as many digits as you choose to display.
What's the difference between density and mass concentration?
Density is the mass of a pure substance or material per unit volume. Mass concentration is the mass of one component — like a dissolved solute — within a mixture's total volume. The two use the same kind of units but describe different physical situations.