Mass per volume density.
Drams per Cubic Millimeter to Short tons per Imperial gallon Converter — dr/mm3 to ton/imp gal
Convert Dram per Cubic Millimeter (dr/mm3) to Short ton per Imperial gallon (ton/imp gal) using the exact conversion factor (1 dram per cubic millimeter = 8.879082031 short ton per imperial gallon). See the formula, worked examples, and conversion table.
Drams per Cubic Millimeter to Short tons per Imperial gallon converter
Converter
Density Converter
Convert thousands of mass-per-volume density combinations for science, engineering, agriculture, and fluids.
Context values
Some unit families need one extra value for a physically accurate result.
Mass per volume density.
Result = input x 1.7718452e+6 / 199552.7453.
Density uses kilograms per cubic meter as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Drams per Cubic Millimeter to Short tons per Imperial gallon
Dram per Cubic Millimeter and Short ton per Imperial gallon both measure density — mass per unit volume — a property used to identify materials, check manufacturing quality, and predict whether something floats or sinks. As a fixed reference point, water has a density of exactly 1000 kg/m³ (1 g/cm³, 1 g/mL) at its temperature of maximum density, which is why many density figures in science and engineering are quoted relative to water. Both are mass per volume density units.
Formula
short tons per imperial gallon = drams per cubic millimeter × 8.87908203125
This factor comes from each unit's defined relationship to the category's base unit: 1 dram per cubic millimeter equals 1771845.19531 base units, and 1 short ton per imperial gallon equals 199552.745326 base units, so dividing one by the other gives the direct dram per cubic millimeter-to-short ton per imperial gallon factor of 8.87908203125.
Simple example
1 dr/mm3 × 8.879082031 = 8.879082031 ton/imp gal
1 dram per cubic millimeter = 8.879082031 short tons per imperial gallon.
Real-world example
1,000 dr/mm3 × 8.879082031 = 8,879.082031 ton/imp gal
1,000 drams per cubic millimeter = 8,879.082031 short tons per imperial gallon.
Conversion table
| Dram per Cubic Millimeter (dr/mm3) | Short ton per Imperial gallon (ton/imp gal) |
|---|---|
| 0.1 dr/mm3 | 0.8879082031 ton/imp gal |
| 1 dr/mm3 | 8.879082031 ton/imp gal |
| 10 dr/mm3 | 88.79082031 ton/imp gal |
| 100 dr/mm3 | 887.9082031 ton/imp gal |
| 1,000 dr/mm3 | 8,879.082031 ton/imp gal |
| 10,000 dr/mm3 | 88,790.82031 ton/imp gal |
Reverse conversion: Short ton per Imperial gallon to Dram per Cubic Millimeter
8.879082031 ton/imp gal × 0.1126242551 = 1 dr/mm3
8.879082031 short tons per imperial gallon = 1 drams per cubic millimeter.
drams per cubic millimeter = short tons per imperial gallon × 0.112624255129
For a page dedicated to this direction, see Short ton per Imperial gallon to Dram per Cubic Millimeter.
Understanding the Dram per Cubic Millimeter (dr/mm3)
Mass per volume density.
Understanding the Short ton per Imperial gallon (ton/imp gal)
Mass per volume density.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many short tons per imperial gallon are in 1 dram per cubic millimeter?
1 dram per cubic millimeter equals 8.879082031 short tons per imperial gallon, using the exact defined conversion factor rather than an estimate.
How do I convert dram per cubic millimeter to short ton per imperial gallon?
Multiply the dram per cubic millimeter value by 8.879082031. The converter above does this instantly to whatever precision you set.
How do I convert short ton per imperial gallon back to dram per cubic millimeter?
Use the reverse factor: 1 short ton per imperial gallon equals 0.1126242551 drams per cubic millimeter. You can also use the swap control in the converter above to flip the direction instantly.
What is a dram per cubic millimeter?
Dram per Cubic Millimeter (dr/mm3) is a unit of density.
What is a short ton per imperial gallon?
Short ton per Imperial gallon (ton/imp gal) is a unit of density.
Is the dram per cubic millimeter to short ton per imperial gallon conversion exact?
Yes. Both dram per cubic millimeter and short ton per imperial gallon are defined by fixed standards rather than physical artifacts, so the factor of 8.879082031 used above is exact to as many digits as you choose to display.
What's the difference between density and mass concentration?
Density is the mass of a pure substance or material per unit volume. Mass concentration is the mass of one component — like a dissolved solute — within a mixture's total volume. The two use the same kind of units but describe different physical situations.