Mass per volume density.
Drams per Imperial gallon to Short tons per Cubic Millimeter Converter — dr/imp gal to ton/mm3
Convert Dram per Imperial gallon (dr/imp gal) to Short ton per Cubic Millimeter (ton/mm3) using the exact conversion factor (1 dram per imperial gallon = 4.296274e-13 short ton per cubic millimeter). See the formula, worked examples, and conversion table.
Drams per Imperial gallon to Short tons per Cubic Millimeter converter
Converter
Density Converter
Convert thousands of mass-per-volume density combinations for science, engineering, agriculture, and fluids.
Context values
Some unit families need one extra value for a physically accurate result.
Mass per volume density.
Result = input x 0.3897514557 / 9.0718474e+11.
Density uses kilograms per cubic meter as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Drams per Imperial gallon to Short tons per Cubic Millimeter
Dram per Imperial gallon and Short ton per Cubic Millimeter both measure density — mass per unit volume — a property used to identify materials, check manufacturing quality, and predict whether something floats or sinks. As a fixed reference point, water has a density of exactly 1000 kg/m³ (1 g/cm³, 1 g/mL) at its temperature of maximum density, which is why many density figures in science and engineering are quoted relative to water. Both are mass per volume density units.
Formula
short tons per cubic millimeter = drams per imperial gallon × 4.296274e-13
This factor comes from each unit's defined relationship to the category's base unit: 1 dram per imperial gallon equals 0.389751455715 base units, and 1 short ton per cubic millimeter equals 907184740000 base units, so dividing one by the other gives the direct dram per imperial gallon-to-short ton per cubic millimeter factor of 4.296274e-13.
Simple example
1 dr/imp gal × 4.296274e-13 = 4.296274e-13 ton/mm3
1 dram per imperial gallon = 4.296274e-13 short tons per cubic millimeter.
Real-world example
1,000 dr/imp gal × 4.296274e-13 = 4.296274e-10 ton/mm3
1,000 drams per imperial gallon = 4.296274e-10 short tons per cubic millimeter.
Conversion table
| Dram per Imperial gallon (dr/imp gal) | Short ton per Cubic Millimeter (ton/mm3) |
|---|---|
| 0.1 dr/imp gal | 4.296274e-14 ton/mm3 |
| 1 dr/imp gal | 4.296274e-13 ton/mm3 |
| 10 dr/imp gal | 4.296274e-12 ton/mm3 |
| 100 dr/imp gal | 4.296274e-11 ton/mm3 |
| 1,000 dr/imp gal | 4.296274e-10 ton/mm3 |
| 10,000 dr/imp gal | 4.296274e-9 ton/mm3 |
Reverse conversion: Short ton per Cubic Millimeter to Dram per Imperial gallon
4.296274e-13 ton/mm3 × 2.327598e+12 = 0.9999999114 dr/imp gal
4.296274e-13 short tons per cubic millimeter = 0.9999999114 drams per imperial gallon.
drams per imperial gallon = short tons per cubic millimeter × 2.327598e+12
For a page dedicated to this direction, see Short ton per Cubic Millimeter to Dram per Imperial gallon.
Understanding the Dram per Imperial gallon (dr/imp gal)
Mass per volume density.
Understanding the Short ton per Cubic Millimeter (ton/mm3)
Mass per volume density.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many short tons per cubic millimeter are in 1 dram per imperial gallon?
1 dram per imperial gallon equals 4.296274e-13 short tons per cubic millimeter, using the exact defined conversion factor rather than an estimate.
How do I convert dram per imperial gallon to short ton per cubic millimeter?
Multiply the dram per imperial gallon value by 4.296274e-13. The converter above does this instantly to whatever precision you set.
How do I convert short ton per cubic millimeter back to dram per imperial gallon?
Use the reverse factor: 1 short ton per cubic millimeter equals 2.327598e+12 drams per imperial gallon. You can also use the swap control in the converter above to flip the direction instantly.
What is a dram per imperial gallon?
Dram per Imperial gallon (dr/imp gal) is a unit of density.
What is a short ton per cubic millimeter?
Short ton per Cubic Millimeter (ton/mm3) is a unit of density.
Is the dram per imperial gallon to short ton per cubic millimeter conversion exact?
Yes. Both dram per imperial gallon and short ton per cubic millimeter are defined by fixed standards rather than physical artifacts, so the factor of 4.296274e-13 used above is exact to as many digits as you choose to display.
What's the difference between density and mass concentration?
Density is the mass of a pure substance or material per unit volume. Mass concentration is the mass of one component — like a dissolved solute — within a mixture's total volume. The two use the same kind of units but describe different physical situations.