Mass per volume density.
Milligrams per Liter to Drams per Cubic foot Converter — mg/L to dr/ft3
Convert Milligram per Liter (mg/L) to Dram per Cubic foot (dr/ft3) using the exact conversion factor (1 milligram per liter = 0.0159815579 dram per cubic foot). See the formula, worked examples, conversion table, and common uses.
Milligrams per Liter to Drams per Cubic foot converter
Converter
Density Converter
Convert thousands of mass-per-volume density combinations for science, engineering, agriculture, and fluids.
Context values
Some unit families need one extra value for a physically accurate result.
Mass per volume density.
Result = input x 0.001 / 0.06257212255.
Density uses kilograms per cubic meter as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Milligrams per Liter to Drams per Cubic foot
Milligram per Liter and Dram per Cubic foot both measure density — mass per unit volume — a property used to identify materials, check manufacturing quality, and predict whether something floats or sinks. As a fixed reference point, water has a density of exactly 1000 kg/m³ (1 g/cm³, 1 g/mL) at its temperature of maximum density, which is why many density figures in science and engineering are quoted relative to water. Milligram per Liter is most often used for drinking-water quality standards and contaminant limits.
Formula
drams per cubic foot = milligrams per liter × 0.0159815579075
This factor comes from each unit's defined relationship to the category's base unit: 1 milligram per liter equals 0.001 base units, and 1 dram per cubic foot equals 0.0625721225545 base units, so dividing one by the other gives the direct milligram per liter-to-dram per cubic foot factor of 0.0159815579075.
Simple example
1 mg/L × 0.01598155791 = 0.0159815579 dr/ft3
1 milligram per liter = 0.0159815579 drams per cubic foot.
Real-world example
1,000 mg/L × 0.01598155791 = 15.98155791 dr/ft3
1,000 milligrams per liter = 15.98155791 drams per cubic foot.
Conversion table
| Milligram per Liter (mg/L) | Dram per Cubic foot (dr/ft3) |
|---|---|
| 0.1 mg/L | 0.0015981558 dr/ft3 |
| 1 mg/L | 0.0159815579 dr/ft3 |
| 10 mg/L | 0.1598155791 dr/ft3 |
| 100 mg/L | 1.598155791 dr/ft3 |
| 1,000 mg/L | 15.98155791 dr/ft3 |
| 10,000 mg/L | 159.8155791 dr/ft3 |
Reverse conversion: Dram per Cubic foot to Milligram per Liter
0.0159815579 dr/ft3 × 62.57212255 = 0.9999999995 mg/L
0.0159815579 drams per cubic foot = 0.9999999995 milligrams per liter.
milligrams per liter = drams per cubic foot × 62.5721225545
For a page dedicated to this direction, see Dram per Cubic foot to Milligram per Liter.
Understanding the Milligram per Liter
Milligram per Liter (mg/L) measures mass concentration. One milligram of a substance per liter of solution — for dilute water-based solutions, numerically almost identical to parts per million (ppm). It is classified as a metric derived concentration unit.
Where it's used: The standard unit for drinking-water and environmental contaminant limits worldwide (EPA, WHO)
mg/L vs. g/L. Both are metric mass-concentration units; 1,000 mg/L equals 1 g/L. mg/L is used for dilute concentrations (drinking water, blood tests), while g/L is more common for higher concentrations.
Uses of the Milligram per Liter today
- Drinking-water quality standards and contaminant limits
- Blood and serum concentration reporting in clinical medicine
- Environmental and wastewater testing
Understanding the Dram per Cubic foot (dr/ft3)
Mass per volume density.
Milligram per Liter — sources
- US EPA — National Primary Drinking Water Regulations — Contaminant limits are set and reported in mg/L.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many drams per cubic foot are in 1 milligram per liter?
1 milligram per liter equals 0.0159815579 drams per cubic foot, using the exact defined conversion factor rather than an estimate.
How do I convert milligram per liter to dram per cubic foot?
Multiply the milligram per liter value by 0.01598155791. The converter above does this instantly to whatever precision you set.
How do I convert dram per cubic foot back to milligram per liter?
Use the reverse factor: 1 dram per cubic foot equals 62.57212255 milligrams per liter. You can also use the swap control in the converter above to flip the direction instantly.
What is a milligram per liter?
Milligram per Liter (mg/L) measures mass concentration. One milligram of a substance per liter of solution — for dilute water-based solutions, numerically almost identical to parts per million (ppm). It is classified as a metric derived concentration unit.
What is a dram per cubic foot?
Dram per Cubic foot (dr/ft3) is a unit of density.
Is the milligram per liter to dram per cubic foot conversion exact?
Yes. Both milligram per liter and dram per cubic foot are defined by fixed standards rather than physical artifacts, so the factor of 0.01598155791 used above is exact to as many digits as you choose to display.
What is the difference between mg/l vs. g/l?
Both are metric mass-concentration units; 1,000 mg/L equals 1 g/L. mg/L is used for dilute concentrations (drinking water, blood tests), while g/L is more common for higher concentrations.
Where is the milligram per liter still used today?
The standard unit for drinking-water and environmental contaminant limits worldwide (EPA, WHO)