Mass per volume density.
Slugs per Cubic yard to Short tons per Pint Converter — slug/yd3 to ton/pt
Convert Slug per Cubic yard (slug/yd3) to Short ton per Pint (ton/pt) using the exact conversion factor (1 slug per cubic yard = 0.0000099561 short ton per pint). See the formula, worked examples, and conversion table.
Slugs per Cubic yard to Short tons per Pint converter
Converter
Density Converter
Convert thousands of mass-per-volume density combinations for science, engineering, agriculture, and fluids.
Context values
Some unit families need one extra value for a physically accurate result.
Mass per volume density.
Result = input x 19.08810438 / 1.91722284e+6.
Density uses kilograms per cubic meter as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Slugs per Cubic yard to Short tons per Pint
Slug per Cubic yard and Short ton per Pint both measure density — mass per unit volume — a property used to identify materials, check manufacturing quality, and predict whether something floats or sinks. As a fixed reference point, water has a density of exactly 1000 kg/m³ (1 g/cm³, 1 g/mL) at its temperature of maximum density, which is why many density figures in science and engineering are quoted relative to water. Both are mass per volume density units.
Formula
short tons per pint = slugs per cubic yard × 0.00000995612195716
This factor comes from each unit's defined relationship to the category's base unit: 1 slug per cubic yard equals 19.0881043849 base units, and 1 short ton per pint equals 1917222.83707 base units, so dividing one by the other gives the direct slug per cubic yard-to-short ton per pint factor of 0.00000995612195716.
Simple example
1 slug/yd3 × 0.000009956121957 = 0.0000099561 ton/pt
1 slug per cubic yard = 0.0000099561 short tons per pint.
Real-world example
1,000 slug/yd3 × 0.000009956121957 = 0.009956122 ton/pt
1,000 slugs per cubic yard = 0.009956122 short tons per pint.
Conversion table
| Slug per Cubic yard (slug/yd3) | Short ton per Pint (ton/pt) |
|---|---|
| 0.1 slug/yd3 | 9.956122e-7 ton/pt |
| 1 slug/yd3 | 0.0000099561 ton/pt |
| 10 slug/yd3 | 0.0000995612 ton/pt |
| 100 slug/yd3 | 0.0009956122 ton/pt |
| 1,000 slug/yd3 | 0.009956122 ton/pt |
| 10,000 slug/yd3 | 0.0995612196 ton/pt |
Reverse conversion: Short ton per Pint to Slug per Cubic yard
0.0000099561 ton/pt × 100440.7142 = 0.9999977946 slug/yd3
0.0000099561 short tons per pint = 0.9999977946 slugs per cubic yard.
slugs per cubic yard = short tons per pint × 100440.714196
For a page dedicated to this direction, see Short ton per Pint to Slug per Cubic yard.
Understanding the Slug per Cubic yard (slug/yd3)
Mass per volume density.
Understanding the Short ton per Pint (ton/pt)
Mass per volume density.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many short tons per pint are in 1 slug per cubic yard?
1 slug per cubic yard equals 0.0000099561 short tons per pint, using the exact defined conversion factor rather than an estimate.
How do I convert slug per cubic yard to short ton per pint?
Multiply the slug per cubic yard value by 0.000009956121957. The converter above does this instantly to whatever precision you set.
How do I convert short ton per pint back to slug per cubic yard?
Use the reverse factor: 1 short ton per pint equals 100,440.7142 slugs per cubic yard. You can also use the swap control in the converter above to flip the direction instantly.
What is a slug per cubic yard?
Slug per Cubic yard (slug/yd3) is a unit of density.
What is a short ton per pint?
Short ton per Pint (ton/pt) is a unit of density.
Is the slug per cubic yard to short ton per pint conversion exact?
Yes. Both slug per cubic yard and short ton per pint are defined by fixed standards rather than physical artifacts, so the factor of 0.000009956121957 used above is exact to as many digits as you choose to display.
What's the difference between density and mass concentration?
Density is the mass of a pure substance or material per unit volume. Mass concentration is the mass of one component — like a dissolved solute — within a mixture's total volume. The two use the same kind of units but describe different physical situations.