Mass per volume density.
Slugs per Gallon to Short tons per Cubic foot Converter — slug/gal to ton/ft3
Convert Slug per Gallon (slug/gal) to Short ton per Cubic foot (ton/ft3) using the exact conversion factor (1 slug per gallon = 0.1203392985 short ton per cubic foot). See the formula, worked examples, and conversion table.
Slugs per Gallon to Short tons per Cubic foot converter
Converter
Density Converter
Convert thousands of mass-per-volume density combinations for science, engineering, agriculture, and fluids.
Context values
Some unit families need one extra value for a physically accurate result.
Mass per volume density.
Result = input x 3855.301291 / 32036.92675.
Density uses kilograms per cubic meter as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Slugs per Gallon to Short tons per Cubic foot
Slug per Gallon and Short ton per Cubic foot both measure density — mass per unit volume — a property used to identify materials, check manufacturing quality, and predict whether something floats or sinks. As a fixed reference point, water has a density of exactly 1000 kg/m³ (1 g/cm³, 1 g/mL) at its temperature of maximum density, which is why many density figures in science and engineering are quoted relative to water. Both are mass per volume density units.
Formula
short tons per cubic foot = slugs per gallon × 0.120339298497
This factor comes from each unit's defined relationship to the category's base unit: 1 slug per gallon equals 3855.30129084 base units, and 1 short ton per cubic foot equals 32036.9267479 base units, so dividing one by the other gives the direct slug per gallon-to-short ton per cubic foot factor of 0.120339298497.
Simple example
1 slug/gal × 0.1203392985 = 0.1203392985 ton/ft3
1 slug per gallon = 0.1203392985 short tons per cubic foot.
Real-world example
1,000 slug/gal × 0.1203392985 = 120.3392985 ton/ft3
1,000 slugs per gallon = 120.3392985 short tons per cubic foot.
Conversion table
| Slug per Gallon (slug/gal) | Short ton per Cubic foot (ton/ft3) |
|---|---|
| 0.1 slug/gal | 0.0120339299 ton/ft3 |
| 1 slug/gal | 0.1203392985 ton/ft3 |
| 10 slug/gal | 1.203392985 ton/ft3 |
| 100 slug/gal | 12.03392985 ton/ft3 |
| 1,000 slug/gal | 120.3392985 ton/ft3 |
| 10,000 slug/gal | 1,203.392985 ton/ft3 |
Reverse conversion: Short ton per Cubic foot to Slug per Gallon
0.1203392985 ton/ft3 × 8.309837372 = 1 slug/gal
0.1203392985 short tons per cubic foot = 1 slugs per gallon.
slugs per gallon = short tons per cubic foot × 8.30983737226
For a page dedicated to this direction, see Short ton per Cubic foot to Slug per Gallon.
Understanding the Slug per Gallon (slug/gal)
Mass per volume density.
Understanding the Short ton per Cubic foot (ton/ft3)
Mass per volume density.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many short tons per cubic foot are in 1 slug per gallon?
1 slug per gallon equals 0.1203392985 short tons per cubic foot, using the exact defined conversion factor rather than an estimate.
How do I convert slug per gallon to short ton per cubic foot?
Multiply the slug per gallon value by 0.1203392985. The converter above does this instantly to whatever precision you set.
How do I convert short ton per cubic foot back to slug per gallon?
Use the reverse factor: 1 short ton per cubic foot equals 8.309837372 slugs per gallon. You can also use the swap control in the converter above to flip the direction instantly.
What is a slug per gallon?
Slug per Gallon (slug/gal) is a unit of density.
What is a short ton per cubic foot?
Short ton per Cubic foot (ton/ft3) is a unit of density.
Is the slug per gallon to short ton per cubic foot conversion exact?
Yes. Both slug per gallon and short ton per cubic foot are defined by fixed standards rather than physical artifacts, so the factor of 0.1203392985 used above is exact to as many digits as you choose to display.
What's the difference between density and mass concentration?
Density is the mass of a pure substance or material per unit volume. Mass concentration is the mass of one component — like a dissolved solute — within a mixture's total volume. The two use the same kind of units but describe different physical situations.