Mass per volume density.
Slugs per Gallon to Short tons per Liter Converter — slug/gal to ton/L
Convert Slug per Gallon (slug/gal) to Short ton per Liter (ton/L) using the exact conversion factor (1 slug per gallon = 0.0042497422 short ton per liter). See the formula, worked examples, and conversion table.
Slugs per Gallon to Short tons per Liter converter
Converter
Density Converter
Convert thousands of mass-per-volume density combinations for science, engineering, agriculture, and fluids.
Mass per volume density.
Result = input x 3855.301291 / 907184.74.
Density uses kilograms per cubic meter as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Slugs per Gallon to Short tons per Liter
Slug per Gallon and Short ton per Liter both measure density — mass per unit volume — a property used to identify materials, check manufacturing quality, and predict whether something floats or sinks. As a fixed reference point, water has a density of exactly 1000 kg/m³ (1 g/cm³, 1 g/mL) at its temperature of maximum density, which is why many density figures in science and engineering are quoted relative to water. Both are mass per volume density units.
Formula
short tons per liter = slugs per gallon × 0.00424974221991
This factor comes from each unit's defined relationship to the category's base unit: 1 slug per gallon equals 3855.30129084 base units, and 1 short ton per liter equals 907184.74 base units, so dividing one by the other gives the direct slug per gallon-to-short ton per liter factor of 0.00424974221991.
Simple example
1 slug/gal × 0.00424974222 = 0.0042497422 ton/L
1 slug per gallon = 0.0042497422 short tons per liter.
Real-world example
1,000 slug/gal × 0.00424974222 = 4.24974222 ton/L
1,000 slugs per gallon = 4.24974222 short tons per liter.
Conversion table
| Slug per Gallon (slug/gal) | Short ton per Liter (ton/L) |
|---|---|
| 0.1 slug/gal | 0.0004249742 ton/L |
| 1 slug/gal | 0.0042497422 ton/L |
| 10 slug/gal | 0.0424974222 ton/L |
| 100 slug/gal | 0.424974222 ton/L |
| 1,000 slug/gal | 4.24974222 ton/L |
| 10,000 slug/gal | 42.4974222 ton/L |
Reverse conversion: Short ton per Liter to Slug per Gallon
0.0042497422 ton/L × 235.3083901 = 0.9999999953 slug/gal
0.0042497422 short tons per liter = 0.9999999953 slugs per gallon.
slugs per gallon = short tons per liter × 235.308390075
For a page dedicated to this direction, see Short ton per Liter to Slug per Gallon.
Understanding the Slug per Gallon (slug/gal)
Mass per volume density.
Understanding the Short ton per Liter (ton/L)
Mass per volume density.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many short tons per liter are in 1 slug per gallon?
1 slug per gallon equals 0.0042497422 short tons per liter, using the exact defined conversion factor rather than an estimate.
How do I convert slug per gallon to short ton per liter?
Multiply the slug per gallon value by 0.00424974222. The converter above does this instantly to whatever precision you set.
How do I convert short ton per liter back to slug per gallon?
Use the reverse factor: 1 short ton per liter equals 235.3083901 slugs per gallon. You can also use the swap control in the converter above to flip the direction instantly.
What is a slug per gallon?
Slug per Gallon (slug/gal) is a unit of density.
What is a short ton per liter?
Short ton per Liter (ton/L) is a unit of density.
Is the slug per gallon to short ton per liter conversion exact?
Yes. Both slug per gallon and short ton per liter are defined by fixed standards rather than physical artifacts, so the factor of 0.00424974222 used above is exact to as many digits as you choose to display.
What's the difference between density and mass concentration?
Density is the mass of a pure substance or material per unit volume. Mass concentration is the mass of one component — like a dissolved solute — within a mixture's total volume. The two use the same kind of units but describe different physical situations.