Mass per volume density.
Stones per Liter to Short tons per Cubic Centimeter Converter — st/L to ton/cm3
Convert Stone per Liter (st/L) to Short ton per Cubic Centimeter (ton/cm3) using the exact conversion factor (1 stone per liter = 0.000007 short ton per cubic centimeter). See the formula, worked examples, and conversion table.
Stones per Liter to Short tons per Cubic Centimeter converter
Converter
Density Converter
Convert thousands of mass-per-volume density combinations for science, engineering, agriculture, and fluids.
Context values
Some unit families need one extra value for a physically accurate result.
Mass per volume density.
Result = input x 6350.29318 / 9.0718474e+8.
Density uses kilograms per cubic meter as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Stones per Liter to Short tons per Cubic Centimeter
Stone per Liter and Short ton per Cubic Centimeter both measure density — mass per unit volume — a property used to identify materials, check manufacturing quality, and predict whether something floats or sinks. As a fixed reference point, water has a density of exactly 1000 kg/m³ (1 g/cm³, 1 g/mL) at its temperature of maximum density, which is why many density figures in science and engineering are quoted relative to water. Both are mass per volume density units.
Formula
short tons per cubic centimeter = stones per liter × 0.000007
This factor comes from each unit's defined relationship to the category's base unit: 1 stone per liter equals 6350.29318 base units, and 1 short ton per cubic centimeter equals 907184740 base units, so dividing one by the other gives the direct stone per liter-to-short ton per cubic centimeter factor of 0.000007.
Simple example
1 st/L × 0.000007 = 0.000007 ton/cm3
1 stone per liter = 0.000007 short tons per cubic centimeter.
Real-world example
1,000 st/L × 0.000007 = 0.007 ton/cm3
1,000 stones per liter = 0.007 short tons per cubic centimeter.
Conversion table
| Stone per Liter (st/L) | Short ton per Cubic Centimeter (ton/cm3) |
|---|---|
| 0.1 st/L | 7e-7 ton/cm3 |
| 1 st/L | 0.000007 ton/cm3 |
| 10 st/L | 0.00007 ton/cm3 |
| 100 st/L | 0.0007 ton/cm3 |
| 1,000 st/L | 0.007 ton/cm3 |
| 10,000 st/L | 0.07 ton/cm3 |
Reverse conversion: Short ton per Cubic Centimeter to Stone per Liter
0.000007 ton/cm3 × 142857.1429 = 1 st/L
0.000007 short tons per cubic centimeter = 1 stones per liter.
stones per liter = short tons per cubic centimeter × 142857.142857
For a page dedicated to this direction, see Short ton per Cubic Centimeter to Stone per Liter.
Understanding the Stone per Liter (st/L)
Mass per volume density.
Understanding the Short ton per Cubic Centimeter (ton/cm3)
Mass per volume density.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many short tons per cubic centimeter are in 1 stone per liter?
1 stone per liter equals 0.000007 short tons per cubic centimeter, using the exact defined conversion factor rather than an estimate.
How do I convert stone per liter to short ton per cubic centimeter?
Multiply the stone per liter value by 0.000007. The converter above does this instantly to whatever precision you set.
How do I convert short ton per cubic centimeter back to stone per liter?
Use the reverse factor: 1 short ton per cubic centimeter equals 142,857.1429 stones per liter. You can also use the swap control in the converter above to flip the direction instantly.
What is a stone per liter?
Stone per Liter (st/L) is a unit of density.
What is a short ton per cubic centimeter?
Short ton per Cubic Centimeter (ton/cm3) is a unit of density.
Is the stone per liter to short ton per cubic centimeter conversion exact?
Yes. Both stone per liter and short ton per cubic centimeter are defined by fixed standards rather than physical artifacts, so the factor of 0.000007 used above is exact to as many digits as you choose to display.
What's the difference between density and mass concentration?
Density is the mass of a pure substance or material per unit volume. Mass concentration is the mass of one component — like a dissolved solute — within a mixture's total volume. The two use the same kind of units but describe different physical situations.