Attofarad is 1e-18 farad units.
Attofarads to Gigafarads Converter — aF to GF
Convert Attofarad (aF) to Gigafarad (GF) using the exact conversion factor (1 attofarad = 1e-27 gigafarad). See the formula, worked examples, and conversion table.
Attofarads to Gigafarads converter
Converter
Electricity Converter
Convert electrical units by family and calculate voltage, current, resistance, power, and energy with context values.
Context values
Some unit families need one extra value for a physically accurate result.
Gigafarad is 1000000000 farad units.
Result = input x 1e-18 / 1e+9.
Electrical units in the same family convert directly.
Reserved above the conversion cards and below the converter.
About Converting Attofarads to Gigafarads
Attofarad and Gigafarad both belong to the electricity family — voltage, current, resistance, power, or energy — units that show up constantly when working across the different standards used by household wiring (120V/240V depending on region), automotive electrical systems (12V/24V), and electronics design. Specifically: Attofarad is 1e-18 farad units, and gigafarad is 1000000000 farad units.
Formula
gigafarads = attofarads × 1e-27
This factor comes from each unit's defined relationship to the category's base unit: 1 attofarad equals 1e-18 base units, and 1 gigafarad equals 1000000000 base units, so dividing one by the other gives the direct attofarad-to-gigafarad factor of 1e-27.
Simple example
1 aF × 1e-27 = 1e-27 GF
1 attofarad = 1e-27 gigafarads.
Real-world example
120 aF × 1e-27 = 1.2e-25 GF
120 attofarads = 1.2e-25 gigafarads.
Conversion table
| Attofarad (aF) | Gigafarad (GF) |
|---|---|
| 1 aF | 1e-27 GF |
| 5 aF | 5e-27 GF |
| 12 aF | 1.2e-26 GF |
| 24 aF | 2.4e-26 GF |
| 120 aF | 1.2e-25 GF |
| 240 aF | 2.4e-25 GF |
Reverse conversion: Gigafarad to Attofarad
1e-27 GF × 1e+27 = 1 aF
1e-27 gigafarads = 1 attofarad.
attofarads = gigafarads × 1e+27
For a page dedicated to this direction, see Gigafarad to Attofarad.
Understanding the Attofarad (aF)
Attofarad is 1e-18 farad units.
Understanding the Gigafarad (GF)
Gigafarad is 1000000000 farad units.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many gigafarads are in 1 attofarad?
1 attofarad equals 1e-27 gigafarads, using the exact defined conversion factor rather than an estimate.
How do I convert attofarad to gigafarad?
Multiply the attofarad value by 1e-27. The converter above does this instantly to whatever precision you set.
How do I convert gigafarad back to attofarad?
Use the reverse factor: 1 gigafarad equals 1e+27 attofarads. You can also use the swap control in the converter above to flip the direction instantly.
What is a attofarad?
Attofarad (aF) is a unit of electricity.
What is a gigafarad?
Gigafarad (GF) is a unit of electricity.
Is the attofarad to gigafarad conversion exact?
Yes. Both attofarad and gigafarad are defined by fixed standards rather than physical artifacts, so the factor of 1e-27 used above is exact to as many digits as you choose to display.
What's the difference between voltage, current, and resistance?
Voltage (volts) is the electrical potential difference driving current through a circuit. Current (amperes) is the rate of flow of electric charge. Resistance (ohms) is how much a component opposes that flow. They're related by Ohm's law (V = I × R), but they are distinct physical quantities, and this page converts between units of just one of them.