Attohenry is 1e-18 henry units.
Attohenrys to Millihenrys Converter — aH to mH
Convert Attohenry (aH) to Millihenry (mH) using the exact conversion factor (1 attohenry = 1e-15 millihenry). See the formula, worked examples, and conversion table.
Attohenrys to Millihenrys converter
Converter
Electricity Converter
Convert electrical units by family and calculate voltage, current, resistance, power, and energy with context values.
Context values
Some unit families need one extra value for a physically accurate result.
Millihenry is 0.001 henry units.
Result = input x 1e-18 / 0.001.
Electrical units in the same family convert directly.
Reserved above the conversion cards and below the converter.
About Converting Attohenrys to Millihenrys
Attohenry and Millihenry both belong to the electricity family — voltage, current, resistance, power, or energy — units that show up constantly when working across the different standards used by household wiring (120V/240V depending on region), automotive electrical systems (12V/24V), and electronics design. Specifically: Attohenry is 1e-18 henry units, and millihenry is 0.001 henry units.
Formula
millihenrys = attohenrys × 1e-15
This factor comes from each unit's defined relationship to the category's base unit: 1 attohenry equals 1e-18 base units, and 1 millihenry equals 0.001 base units, so dividing one by the other gives the direct attohenry-to-millihenry factor of 1e-15.
Simple example
1 aH × 1e-15 = 1e-15 mH
1 attohenry = 1e-15 millihenrys.
Real-world example
120 aH × 1e-15 = 1.2e-13 mH
120 attohenrys = 1.2e-13 millihenrys.
Conversion table
| Attohenry (aH) | Millihenry (mH) |
|---|---|
| 1 aH | 1e-15 mH |
| 5 aH | 5e-15 mH |
| 12 aH | 1.2e-14 mH |
| 24 aH | 2.4e-14 mH |
| 120 aH | 1.2e-13 mH |
| 240 aH | 2.4e-13 mH |
Reverse conversion: Millihenry to Attohenry
1e-15 mH × 1e+15 = 1 aH
1e-15 millihenrys = 1 attohenry.
attohenrys = millihenrys × 1e+15
For a page dedicated to this direction, see Millihenry to Attohenry.
Understanding the Attohenry (aH)
Attohenry is 1e-18 henry units.
Understanding the Millihenry (mH)
Millihenry is 0.001 henry units.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many millihenrys are in 1 attohenry?
1 attohenry equals 1e-15 millihenrys, using the exact defined conversion factor rather than an estimate.
How do I convert attohenry to millihenry?
Multiply the attohenry value by 1e-15. The converter above does this instantly to whatever precision you set.
How do I convert millihenry back to attohenry?
Use the reverse factor: 1 millihenry equals 1e+15 attohenrys. You can also use the swap control in the converter above to flip the direction instantly.
What is a attohenry?
Attohenry (aH) is a unit of electricity.
What is a millihenry?
Millihenry (mH) is a unit of electricity.
Is the attohenry to millihenry conversion exact?
Yes. Both attohenry and millihenry are defined by fixed standards rather than physical artifacts, so the factor of 1e-15 used above is exact to as many digits as you choose to display.
What's the difference between voltage, current, and resistance?
Voltage (volts) is the electrical potential difference driving current through a circuit. Current (amperes) is the rate of flow of electric charge. Resistance (ohms) is how much a component opposes that flow. They're related by Ohm's law (V = I × R), but they are distinct physical quantities, and this page converts between units of just one of them.