Rontosiemens is 1e-27 siemens units.
Rontosiemens to Nanosiemens Converter — rS to nS
Convert Rontosiemens (rS) to Nanosiemens (nS) using the exact conversion factor (1 rontosiemens = 1e-18 nanosiemens). See the formula, worked examples, and conversion table.
Rontosiemens to Nanosiemens converter
Converter
Electricity Converter
Convert electrical units by family and calculate voltage, current, resistance, power, and energy with context values.
Context values
Some unit families need one extra value for a physically accurate result.
Nanosiemens is 1e-9 siemens units.
Result = input x 1e-27 / 1e-9.
Electrical units in the same family convert directly.
Reserved above the conversion cards and below the converter.
About Converting Rontosiemens to Nanosiemens
Rontosiemens and Nanosiemens both belong to the electricity family — voltage, current, resistance, power, or energy — units that show up constantly when working across the different standards used by household wiring (120V/240V depending on region), automotive electrical systems (12V/24V), and electronics design. Specifically: Rontosiemens is 1e-27 siemens units, and nanosiemens is 1e-9 siemens units.
Formula
nanosiemens = rontosiemens × 1e-18
This factor comes from each unit's defined relationship to the category's base unit: 1 rontosiemens equals 1e-27 base units, and 1 nanosiemens equals 1e-9 base units, so dividing one by the other gives the direct rontosiemens-to-nanosiemens factor of 1e-18.
Simple example
1 rS × 1e-18 = 1e-18 nS
1 rontosiemens = 1e-18 nanosiemens.
Real-world example
120 rS × 1e-18 = 1.2e-16 nS
120 rontosiemens = 1.2e-16 nanosiemens.
Conversion table
| Rontosiemens (rS) | Nanosiemens (nS) |
|---|---|
| 1 rS | 1e-18 nS |
| 5 rS | 5e-18 nS |
| 12 rS | 1.2e-17 nS |
| 24 rS | 2.4e-17 nS |
| 120 rS | 1.2e-16 nS |
| 240 rS | 2.4e-16 nS |
Reverse conversion: Nanosiemens to Rontosiemens
1e-18 nS × 1e+18 = 1 rS
1e-18 nanosiemens = 1 rontosiemens.
rontosiemens = nanosiemens × 1e+18
For a page dedicated to this direction, see Nanosiemens to Rontosiemens.
Understanding the Rontosiemens (rS)
Rontosiemens is 1e-27 siemens units.
Understanding the Nanosiemens (nS)
Nanosiemens is 1e-9 siemens units.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many nanosiemens are in 1 rontosiemens?
1 rontosiemens equals 1e-18 nanosiemens, using the exact defined conversion factor rather than an estimate.
How do I convert rontosiemens to nanosiemens?
Multiply the rontosiemens value by 1e-18. The converter above does this instantly to whatever precision you set.
How do I convert nanosiemens back to rontosiemens?
Use the reverse factor: 1 nanosiemens equals 1e+18 rontosiemens. You can also use the swap control in the converter above to flip the direction instantly.
What is a rontosiemens?
Rontosiemens (rS) is a unit of electricity.
What is a nanosiemens?
Nanosiemens (nS) is a unit of electricity.
Is the rontosiemens to nanosiemens conversion exact?
Yes. Both rontosiemens and nanosiemens are defined by fixed standards rather than physical artifacts, so the factor of 1e-18 used above is exact to as many digits as you choose to display.
What's the difference between voltage, current, and resistance?
Voltage (volts) is the electrical potential difference driving current through a circuit. Current (amperes) is the rate of flow of electric charge. Resistance (ohms) is how much a component opposes that flow. They're related by Ohm's law (V = I × R), but they are distinct physical quantities, and this page converts between units of just one of them.