Siemens is the SI unit of conductance.
Siemens to Decasiemens Converter — S to daS
Convert Siemens (S) to Decasiemens (daS) using the exact conversion factor (1 siemens = 0.1 decasiemens). See the formula, worked examples, and conversion table.
Siemens to Decasiemens converter
Converter
Electricity Converter
Convert electrical units by family and calculate voltage, current, resistance, power, and energy with context values.
Context values
Some unit families need one extra value for a physically accurate result.
Decasiemens is 10 siemens units.
Result = input x 1 / 10.
Electrical units in the same family convert directly.
Reserved above the conversion cards and below the converter.
About Converting Siemens to Decasiemens
Siemens and Decasiemens both belong to the electricity family — voltage, current, resistance, power, or energy — units that show up constantly when working across the different standards used by household wiring (120V/240V depending on region), automotive electrical systems (12V/24V), and electronics design. Specifically: Siemens is the SI unit of conductance, and decasiemens is 10 siemens units.
Formula
decasiemens = siemens × 0.1
This factor comes from each unit's defined relationship to the category's base unit: 1 siemens equals 1 base unit, and 1 decasiemens equals 10 base units, so dividing one by the other gives the direct siemens-to-decasiemens factor of 0.1.
Simple example
1 S × 0.1 = 0.1 daS
1 siemens = 0.1 decasiemens.
Real-world example
120 S × 0.1 = 12 daS
120 siemens = 12 decasiemens.
Conversion table
| Siemens (S) | Decasiemens (daS) |
|---|---|
| 1 S | 0.1 daS |
| 5 S | 0.5 daS |
| 12 S | 1.2 daS |
| 24 S | 2.4 daS |
| 120 S | 12 daS |
| 240 S | 24 daS |
Reverse conversion: Decasiemens to Siemens
0.1 daS × 10 = 1 S
0.1 decasiemens = 1 siemens.
siemens = decasiemens × 10
For a page dedicated to this direction, see Decasiemens to Siemens.
Understanding the Siemens (S)
Siemens is the SI unit of conductance.
Understanding the Decasiemens (daS)
Decasiemens is 10 siemens units.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many decasiemens are in 1 siemens?
1 siemens equals 0.1 decasiemens, using the exact defined conversion factor rather than an estimate.
How do I convert siemens to decasiemens?
Multiply the siemens value by 0.1. The converter above does this instantly to whatever precision you set.
How do I convert decasiemens back to siemens?
Use the reverse factor: 1 decasiemens equals 10 siemens. You can also use the swap control in the converter above to flip the direction instantly.
What is a siemens?
Siemens (S) is a unit of electricity.
What is a decasiemens?
Decasiemens (daS) is a unit of electricity.
Is the siemens to decasiemens conversion exact?
Yes. Both siemens and decasiemens are defined by fixed standards rather than physical artifacts, so the factor of 0.1 used above is exact to as many digits as you choose to display.
What's the difference between voltage, current, and resistance?
Voltage (volts) is the electrical potential difference driving current through a circuit. Current (amperes) is the rate of flow of electric charge. Resistance (ohms) is how much a component opposes that flow. They're related by Ohm's law (V = I × R), but they are distinct physical quantities, and this page converts between units of just one of them.