Terahenry is 1000000000000 henry units.
Terahenrys to Attohenrys Converter — TH to aH
Convert Terahenry (TH) to Attohenry (aH) using the exact conversion factor (1 terahenry = 1e+30 attohenry). See the formula, worked examples, and conversion table.
Terahenrys to Attohenrys converter
Converter
Electricity Converter
Convert electrical units by family and calculate voltage, current, resistance, power, and energy with context values.
Context values
Some unit families need one extra value for a physically accurate result.
Attohenry is 1e-18 henry units.
Result = input x 1e+12 / 1e-18.
Electrical units in the same family convert directly.
Reserved above the conversion cards and below the converter.
About Converting Terahenrys to Attohenrys
Terahenry and Attohenry both belong to the electricity family — voltage, current, resistance, power, or energy — units that show up constantly when working across the different standards used by household wiring (120V/240V depending on region), automotive electrical systems (12V/24V), and electronics design. Specifically: Terahenry is 1000000000000 henry units, and attohenry is 1e-18 henry units.
Formula
attohenrys = terahenrys × 1e+30
This factor comes from each unit's defined relationship to the category's base unit: 1 terahenry equals 1e+12 base units, and 1 attohenry equals 1e-18 base units, so dividing one by the other gives the direct terahenry-to-attohenry factor of 1e+30.
Simple example
1 TH × 1e+30 = 1e+30 aH
1 terahenry = 1e+30 attohenrys.
Real-world example
120 TH × 1e+30 = 1.2e+32 aH
120 terahenrys = 1.2e+32 attohenrys.
Conversion table
| Terahenry (TH) | Attohenry (aH) |
|---|---|
| 1 TH | 1e+30 aH |
| 5 TH | 5e+30 aH |
| 12 TH | 1.2e+31 aH |
| 24 TH | 2.4e+31 aH |
| 120 TH | 1.2e+32 aH |
| 240 TH | 2.4e+32 aH |
Reverse conversion: Attohenry to Terahenry
1e+30 aH × 1e-30 = 1 TH
1e+30 attohenrys = 1 terahenrys.
terahenrys = attohenrys × 1e-30
For a page dedicated to this direction, see Attohenry to Terahenry.
Understanding the Terahenry (TH)
Terahenry is 1000000000000 henry units.
Understanding the Attohenry (aH)
Attohenry is 1e-18 henry units.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many attohenrys are in 1 terahenry?
1 terahenry equals 1e+30 attohenrys, using the exact defined conversion factor rather than an estimate.
How do I convert terahenry to attohenry?
Multiply the terahenry value by 1e+30. The converter above does this instantly to whatever precision you set.
How do I convert attohenry back to terahenry?
Use the reverse factor: 1 attohenry equals 1e-30 terahenrys. You can also use the swap control in the converter above to flip the direction instantly.
What is a terahenry?
Terahenry (TH) is a unit of electricity.
What is a attohenry?
Attohenry (aH) is a unit of electricity.
Is the terahenry to attohenry conversion exact?
Yes. Both terahenry and attohenry are defined by fixed standards rather than physical artifacts, so the factor of 1e+30 used above is exact to as many digits as you choose to display.
What's the difference between voltage, current, and resistance?
Voltage (volts) is the electrical potential difference driving current through a circuit. Current (amperes) is the rate of flow of electric charge. Resistance (ohms) is how much a component opposes that flow. They're related by Ohm's law (V = I × R), but they are distinct physical quantities, and this page converts between units of just one of them.