Terasiemens is 1000000000000 siemens units.
Terasiemens to Siemens Converter — TS to S
Convert Terasiemens (TS) to Siemens (S) using the exact conversion factor (1 terasiemens = 1e+12 siemens). See the formula, worked examples, and conversion table.
Terasiemens to Siemens converter
Converter
Electricity Converter
Convert electrical units by family and calculate voltage, current, resistance, power, and energy with context values.
Context values
Some unit families need one extra value for a physically accurate result.
Siemens is the SI unit of conductance.
Result = input x 1e+12 / 1.
Electrical units in the same family convert directly.
Reserved above the conversion cards and below the converter.
About Converting Terasiemens to Siemens
Terasiemens and Siemens both belong to the electricity family — voltage, current, resistance, power, or energy — units that show up constantly when working across the different standards used by household wiring (120V/240V depending on region), automotive electrical systems (12V/24V), and electronics design. Specifically: Terasiemens is 1000000000000 siemens units, and siemens is the SI unit of conductance.
Formula
siemens = terasiemens × 1e+12
This factor comes from each unit's defined relationship to the category's base unit: 1 terasiemens equals 1e+12 base units, and 1 siemens equals 1 base unit, so dividing one by the other gives the direct terasiemens-to-siemens factor of 1e+12.
Simple example
1 TS × 1e+12 = 1e+12 S
1 terasiemens = 1e+12 siemens.
Real-world example
120 TS × 1e+12 = 1.2e+14 S
120 terasiemens = 1.2e+14 siemens.
Conversion table
| Terasiemens (TS) | Siemens (S) |
|---|---|
| 1 TS | 1e+12 S |
| 5 TS | 5e+12 S |
| 12 TS | 1.2e+13 S |
| 24 TS | 2.4e+13 S |
| 120 TS | 1.2e+14 S |
| 240 TS | 2.4e+14 S |
Reverse conversion: Siemens to Terasiemens
1e+12 S × 1e-12 = 1 TS
1e+12 siemens = 1 terasiemens.
terasiemens = siemens × 1e-12
For a page dedicated to this direction, see Siemens to Terasiemens.
Understanding the Terasiemens (TS)
Terasiemens is 1000000000000 siemens units.
Understanding the Siemens (S)
Siemens is the SI unit of conductance.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many siemens are in 1 terasiemens?
1 terasiemens equals 1e+12 siemens, using the exact defined conversion factor rather than an estimate.
How do I convert terasiemens to siemens?
Multiply the terasiemens value by 1e+12. The converter above does this instantly to whatever precision you set.
How do I convert siemens back to terasiemens?
Use the reverse factor: 1 siemens equals 1e-12 terasiemens. You can also use the swap control in the converter above to flip the direction instantly.
What is a terasiemens?
Terasiemens (TS) is a unit of electricity.
What is a siemens?
Siemens (S) is a unit of electricity.
Is the terasiemens to siemens conversion exact?
Yes. Both terasiemens and siemens are defined by fixed standards rather than physical artifacts, so the factor of 1e+12 used above is exact to as many digits as you choose to display.
What's the difference between voltage, current, and resistance?
Voltage (volts) is the electrical potential difference driving current through a circuit. Current (amperes) is the rate of flow of electric charge. Resistance (ohms) is how much a component opposes that flow. They're related by Ohm's law (V = I × R), but they are distinct physical quantities, and this page converts between units of just one of them.