A dyne is a CGS force unit.
Dynes to Newtons Converter — dyn to N
Convert Dyne (dyn) to Newton (N) using the exact conversion factor (1 dyne = 0.00001 newton). See the formula, worked examples, conversion table, history, and common uses.
Dynes to Newtons converter
Converter
Engineering Converter
Convert common stress, force, torque, power, and energy units used in engineering.
Context values
Some unit families need one extra value for a physically accurate result.
The newton is the SI unit of force.
Result = input x 1e-5 / 1.
Force units are compatible.
Reserved above the conversion cards and below the converter.
About Converting Dynes to Newtons
Dyne and Newton both measure a quantity used in structural or mechanical engineering — commonly stress, pressure, force, torque, power, or energy — where converting between the unit conventions used in different regions, industries, or equipment specifications is a routine part of design work. Specifically: A dyne is a CGS force unit, and the newton is the SI unit of force.
Formula
newtons = dynes × 0.00001
This factor comes from each unit's defined relationship to the category's base unit: 1 dyne equals 0.00001 base units, and 1 newton equals 1 base unit, so dividing one by the other gives the direct dyne-to-newton factor of 0.00001.
Simple example
1 dyn × 0.00001 = 0.00001 N
1 dyne = 0.00001 newtons.
Real-world example
100 dyn × 0.00001 = 0.001 N
100 dynes = 0.001 newtons.
Conversion table
| Dyne (dyn) | Newton (N) |
|---|---|
| 1 dyn | 0.00001 N |
| 10 dyn | 0.0001 N |
| 50 dyn | 0.0005 N |
| 100 dyn | 0.001 N |
| 500 dyn | 0.005 N |
| 1,000 dyn | 0.01 N |
Reverse conversion: Newton to Dyne
0.00001 N × 100000 = 1 dyn
0.00001 newtons = 1 dyne.
dynes = newtons × 100000
For a page dedicated to this direction, see Newton to Dyne.
Understanding the Dyne (dyn)
A dyne is a CGS force unit.
Understanding the Newton
Newton (N) measures force. The newton is the SI derived unit of force: the force needed to accelerate a 1 kg mass at 1 meter per second squared. It is classified as a SI derived unit.
Where it's used: Standard scientific and engineering force unit worldwide
Uses of the Newton today
- Physics and engineering force calculations
- Material strength and structural engineering specifications
- Product specifications (e.g. spring force, adhesive strength)
History of the Newton
The newton is named after Isaac Newton in recognition of his laws of motion, which define the relationship between force, mass, and acceleration that the unit embodies. It was formally adopted as the SI derived unit of force as part of the broader 20th-century SI system.
Historical origin. Newton was not the invention of a single named person; it developed through the process described above.
Newton — sources
- BIPM SI Brochure — Coherent derived units — Defines the newton as the SI unit of force.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many newtons are in 1 dyne?
1 dyne equals 0.00001 newtons, using the exact defined conversion factor rather than an estimate.
How do I convert dyne to newton?
Multiply the dyne value by 0.00001. The converter above does this instantly to whatever precision you set.
How do I convert newton back to dyne?
Use the reverse factor: 1 newton equals 100,000 dynes. You can also use the swap control in the converter above to flip the direction instantly.
What is a dyne?
Dyne (dyn) is a unit of engineering.
What is a newton?
Newton (N) measures force. The newton is the SI derived unit of force: the force needed to accelerate a 1 kg mass at 1 meter per second squared. It is classified as a SI derived unit.
Is the dyne to newton conversion exact?
Yes. Both dyne and newton are defined by fixed standards rather than physical artifacts, so the factor of 0.00001 used above is exact to as many digits as you choose to display.
Why do engineering unit conventions vary so much by region and industry?
Pressure, force, and stress can be expressed in metric (pascal, newton), US customary (psi, pound-force), or older and industry-specific units (atmosphere, torr, kip) depending on the country, industry, and even the equipment manufacturer, which is why engineers routinely need to convert between them when working across specs from different sources.