Millipascal to PSI
Convert Millipascal to PSI instantly. Free online engineering unit converter with exact formula, conversion table and FAQ.
Reserved for a responsive leaderboard above the conversion details.
Professional calculator style
World-scale conversion engine
30+ categories
6,500+ units
Instant results
Offline ready
Converter
Engineering Converter
Convert common stress, force, torque, power, and energy units used in engineering.
Context values
Some unit families need one extra value for a physically accurate result.
Use the converter to see the formula.
Results update instantly for Millipascal to PSI conversions.
Reserved above the conversion cards and below the converter.
Formula
psi = mPa × 1.45038e-07
mPa = psi × 6.89476e+06
Conversion table
| 1 mPa | 1.45038e-07 psi |
| 5 mPa | 7.25189e-07 psi |
| 10 mPa | 1.45038e-06 psi |
| 20 mPa | 2.90075e-06 psi |
| 50 mPa | 7.25189e-06 psi |
| 100 mPa | 1.45038e-05 psi |
| 500 mPa | 7.25189e-05 psi |
| 1000 mPa | 0.000145038 psi |
Related conversions
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
What is the source unit in this conversion?
The source unit is the Millipascal (mPa). Millipascal is 0.001 pascal units.
What is the destination unit in this conversion?
The destination unit is the PSI (psi). Pounds per square inch.
How do I convert Millipascal to PSI?
Multiply the Millipascal value by 1.45038e-07. For example, 10 mPa × 1.45038e-07 = 1.45038e-06 psi.
Is the Millipascal to PSI conversion exact?
Yes. Both units belong to the same engineering measurement family (pressure and mechanical stress), so the ratio between them is a fixed, defined value rather than a measured approximation.
Where is this conversion commonly used?
It's used whenever a value expressed in Millipascal needs to be compared with, or reported in, PSI, such as in engineering, scientific, or industrial calculations.
Can I convert PSI back to Millipascal?
Yes. Multiply the PSI value by 6.89476e+06 to get Millipascal.
Reserved between the FAQ and the article so the page stays balanced.
About this conversion
This page converts Millipascal (mPa) to PSI (psi) within the engineering converter.
Millipascal is 0.001 pascal units. Pounds per square inch.
The formula is psi = mPa × 1.45038e-07, based on each unit's fixed relationship to the pressure and mechanical stress base unit.
The conversion is exact, since it relies on a fixed numerical ratio between the two units rather than a measured or approximate value.
Use the calculator above for instant results, or the table below for common Millipascal values already converted to PSI.