The pascal is one newton per square meter.
Pascals to Hectopascals Converter — Pa to hPa
Convert Pascal (Pa) to Hectopascal (hPa) using the exact conversion factor (1 pascal = 0.01 hectopascal). See the formula, worked examples, conversion table, history, and common uses.
Pascals to Hectopascals converter
Converter
Engineering Converter
Convert common stress, force, torque, power, and energy units used in engineering.
Context values
Some unit families need one extra value for a physically accurate result.
Hectopascal is 100 pascal units.
Result = input x 1 / 100.
Stress Pressure units are compatible.
Reserved above the conversion cards and below the converter.
About Converting Pascals to Hectopascals
Pascal and Hectopascal both measure a quantity used in structural or mechanical engineering — commonly stress, pressure, force, torque, power, or energy — where converting between the unit conventions used in different regions, industries, or equipment specifications is a routine part of design work. Pascal is most often used for scientific and engineering pressure measurement worldwide.
Formula
hectopascals = pascals × 0.01
This factor comes from each unit's defined relationship to the category's base unit: 1 pascal equals 1 base unit, and 1 hectopascal equals 100 base units, so dividing one by the other gives the direct pascal-to-hectopascal factor of 0.01.
Simple example
1 Pa × 0.01 = 0.01 hPa
1 pascal = 0.01 hectopascals.
Real-world example
100 Pa × 0.01 = 1 hPa
100 pascals = 1 hectopascal.
Conversion table
| Pascal (Pa) | Hectopascal (hPa) |
|---|---|
| 1 Pa | 0.01 hPa |
| 10 Pa | 0.1 hPa |
| 50 Pa | 0.5 hPa |
| 100 Pa | 1 hPa |
| 500 Pa | 5 hPa |
| 1,000 Pa | 10 hPa |
Reverse conversion: Hectopascal to Pascal
0.01 hPa × 100 = 1 Pa
0.01 hectopascals = 1 pascal.
pascals = hectopascals × 100
For a page dedicated to this direction, see Hectopascal to Pascal.
Understanding the Pascal
Pascal (Pa) measures pressure. The pascal is the SI derived unit of pressure: one newton of force per square meter. It is classified as a SI derived unit.
Where it's used: Standard scientific pressure unit worldwide
Uses of the Pascal today
- Scientific and engineering pressure measurement worldwide
- Meteorology (often as hectopascals, equivalent to millibars)
- Material science (stress and strength, typically in megapascals)
History of the Pascal
The pascal is named after Blaise Pascal, whose 17th-century experiments clarified the physics of fluid pressure and vacuum. It was adopted as the SI derived unit of pressure in 1971, replacing the older, non-coherent CGS pressure units used in much scientific work up to that point.
Historical origin. Pascal was not the invention of a single named person; it developed through the process described above.
Understanding the Hectopascal (hPa)
Hectopascal is 100 pascal units.
Pascal — sources
- BIPM SI Brochure — Coherent derived units — Defines the pascal as the SI unit of pressure.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many hectopascals are in 1 pascal?
1 pascal equals 0.01 hectopascals, using the exact defined conversion factor rather than an estimate.
How do I convert pascal to hectopascal?
Multiply the pascal value by 0.01. The converter above does this instantly to whatever precision you set.
How do I convert hectopascal back to pascal?
Use the reverse factor: 1 hectopascal equals 100 pascals. You can also use the swap control in the converter above to flip the direction instantly.
What is a pascal?
Pascal (Pa) measures pressure. The pascal is the SI derived unit of pressure: one newton of force per square meter. It is classified as a SI derived unit.
What is a hectopascal?
Hectopascal (hPa) is a unit of engineering.
Is the pascal to hectopascal conversion exact?
Yes. Both pascal and hectopascal are defined by fixed standards rather than physical artifacts, so the factor of 0.01 used above is exact to as many digits as you choose to display.
Where is the pascal still used today?
Standard scientific pressure unit worldwide
Why do engineering unit conventions vary so much by region and industry?
Pressure, force, and stress can be expressed in metric (pascal, newton), US customary (psi, pound-force), or older and industry-specific units (atmosphere, torr, kip) depending on the country, industry, and even the equipment manufacturer, which is why engineers routinely need to convert between them when working across specs from different sources.