The pascal is one newton per square meter.
Pascals to Megapascals Converter — Pa to MPa
Convert Pascal (Pa) to Megapascal (MPa) using the exact conversion factor (1 pascal = 0.000001 megapascal). See the formula, worked examples, conversion table, history, and common uses.
Pascals to Megapascals converter
Converter
Engineering Converter
Convert common stress, force, torque, power, and energy units used in engineering.
Context values
Some unit families need one extra value for a physically accurate result.
Megapascal is 1000000 pascal units.
Result = input x 1 / 1e+6.
Stress Pressure units are compatible.
Reserved above the conversion cards and below the converter.
About Converting Pascals to Megapascals
Pascal and Megapascal both measure a quantity used in structural or mechanical engineering — commonly stress, pressure, force, torque, power, or energy — where converting between the unit conventions used in different regions, industries, or equipment specifications is a routine part of design work. Pascal is most often used for scientific and engineering pressure measurement worldwide.
Formula
megapascals = pascals × 0.000001
This factor comes from each unit's defined relationship to the category's base unit: 1 pascal equals 1 base unit, and 1 megapascal equals 1000000 base units, so dividing one by the other gives the direct pascal-to-megapascal factor of 0.000001.
Simple example
1 Pa × 0.000001 = 0.000001 MPa
1 pascal = 0.000001 megapascals.
Real-world example
100 Pa × 0.000001 = 0.0001 MPa
100 pascals = 0.0001 megapascals.
Conversion table
| Pascal (Pa) | Megapascal (MPa) |
|---|---|
| 1 Pa | 0.000001 MPa |
| 10 Pa | 0.00001 MPa |
| 50 Pa | 0.00005 MPa |
| 100 Pa | 0.0001 MPa |
| 500 Pa | 0.0005 MPa |
| 1,000 Pa | 0.001 MPa |
Reverse conversion: Megapascal to Pascal
0.000001 MPa × 1000000 = 1 Pa
0.000001 megapascals = 1 pascal.
pascals = megapascals × 1000000
For a page dedicated to this direction, see Megapascal to Pascal.
Understanding the Pascal
Pascal (Pa) measures pressure. The pascal is the SI derived unit of pressure: one newton of force per square meter. It is classified as a SI derived unit.
Where it's used: Standard scientific pressure unit worldwide
Uses of the Pascal today
- Scientific and engineering pressure measurement worldwide
- Meteorology (often as hectopascals, equivalent to millibars)
- Material science (stress and strength, typically in megapascals)
History of the Pascal
The pascal is named after Blaise Pascal, whose 17th-century experiments clarified the physics of fluid pressure and vacuum. It was adopted as the SI derived unit of pressure in 1971, replacing the older, non-coherent CGS pressure units used in much scientific work up to that point.
Historical origin. Pascal was not the invention of a single named person; it developed through the process described above.
Understanding the Megapascal (MPa)
Megapascal is 1000000 pascal units.
Pascal — sources
- BIPM SI Brochure — Coherent derived units — Defines the pascal as the SI unit of pressure.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many megapascals are in 1 pascal?
1 pascal equals 0.000001 megapascals, using the exact defined conversion factor rather than an estimate.
How do I convert pascal to megapascal?
Multiply the pascal value by 0.000001. The converter above does this instantly to whatever precision you set.
How do I convert megapascal back to pascal?
Use the reverse factor: 1 megapascal equals 1,000,000 pascals. You can also use the swap control in the converter above to flip the direction instantly.
What is a pascal?
Pascal (Pa) measures pressure. The pascal is the SI derived unit of pressure: one newton of force per square meter. It is classified as a SI derived unit.
What is a megapascal?
Megapascal (MPa) is a unit of engineering.
Is the pascal to megapascal conversion exact?
Yes. Both pascal and megapascal are defined by fixed standards rather than physical artifacts, so the factor of 0.000001 used above is exact to as many digits as you choose to display.
Where is the pascal still used today?
Standard scientific pressure unit worldwide
Why do engineering unit conventions vary so much by region and industry?
Pressure, force, and stress can be expressed in metric (pascal, newton), US customary (psi, pound-force), or older and industry-specific units (atmosphere, torr, kip) depending on the country, industry, and even the equipment manufacturer, which is why engineers routinely need to convert between them when working across specs from different sources.