PSI to Millibar
Convert PSI to Millibar instantly. Free online engineering unit converter with exact formula, conversion table and FAQ.
Reserved for a responsive leaderboard above the conversion details.
Professional calculator style
World-scale conversion engine
30+ categories
6,500+ units
Instant results
Offline ready
Converter
Engineering Converter
Convert common stress, force, torque, power, and energy units used in engineering.
Context values
Some unit families need one extra value for a physically accurate result.
Use the converter to see the formula.
Results update instantly for PSI to Millibar conversions.
Reserved above the conversion cards and below the converter.
Formula
mbar = psi × 68.9476
psi = mbar × 0.0145038
Conversion table
| 1 psi | 68.9476 mbar |
| 5 psi | 344.738 mbar |
| 10 psi | 689.476 mbar |
| 20 psi | 1378.95 mbar |
| 50 psi | 3447.38 mbar |
| 100 psi | 6894.76 mbar |
| 500 psi | 34473.8 mbar |
| 1000 psi | 68947.6 mbar |
Related conversions
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
What is the source unit in this conversion?
The source unit is the PSI (psi). Pounds per square inch.
What is the destination unit in this conversion?
The destination unit is the Millibar (mbar). A millibar is 100 pascals.
How do I convert PSI to Millibar?
Multiply the PSI value by 68.9476. For example, 10 psi × 68.9476 = 689.476 mbar.
Is the PSI to Millibar conversion exact?
Yes. Both units belong to the same engineering measurement family (pressure and mechanical stress), so the ratio between them is a fixed, defined value rather than a measured approximation.
Where is this conversion commonly used?
It's used whenever a value expressed in PSI needs to be compared with, or reported in, Millibar, such as in engineering, scientific, or industrial calculations.
Can I convert Millibar back to PSI?
Yes. Multiply the Millibar value by 0.0145038 to get PSI.
Reserved between the FAQ and the article so the page stays balanced.
About this conversion
This page converts PSI (psi) to Millibar (mbar) within the engineering converter.
Pounds per square inch. A millibar is 100 pascals.
The formula is mbar = psi × 68.9476, based on each unit's fixed relationship to the pressure and mechanical stress base unit.
The conversion is exact, since it relies on a fixed numerical ratio between the two units rather than a measured or approximate value.
Use the calculator above for instant results, or the table below for common PSI values already converted to Millibar.