Volumetric flow rate.
Cubic foot per Seconds to Decaliters per Millisecond Converter — ft3/s to daL/ms
Convert Cubic foot per Seconds (ft3/s) to Decaliter per Millisecond (daL/ms) using the exact conversion factor (1 cubic foot per seconds = 0.0028316847 decaliter per millisecond). See the formula, worked examples, conversion table, and common uses.
Cubic foot per Seconds to Decaliters per Millisecond converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.02831684659 / 10.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Cubic foot per Seconds to Decaliters per Millisecond
Cubic foot per Seconds and Decaliter per Millisecond both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Cubic foot per Seconds is most often used for the standard unit used by the us geological survey for reporting river and stream discharge at gauging stations.
Formula
decaliters per millisecond = cubic foot per seconds × 0.0028316846592
This factor comes from each unit's defined relationship to the category's base unit: 1 cubic foot per seconds equals 0.028316846592 base units, and 1 decaliter per millisecond equals 10 base units, so dividing one by the other gives the direct cubic foot per seconds-to-decaliter per millisecond factor of 0.0028316846592.
Simple example
1 ft3/s × 0.002831684659 = 0.0028316847 daL/ms
1 cubic foot per seconds = 0.0028316847 decaliters per millisecond.
Real-world example
60 ft3/s × 0.002831684659 = 0.1699010796 daL/ms
60 cubic foot per seconds = 0.1699010796 decaliters per millisecond.
Conversion table
| Cubic foot per Seconds (ft3/s) | Decaliter per Millisecond (daL/ms) |
|---|---|
| 0.1 ft3/s | 0.0002831685 daL/ms |
| 1 ft3/s | 0.0028316847 daL/ms |
| 10 ft3/s | 0.0283168466 daL/ms |
| 60 ft3/s | 0.1699010796 daL/ms |
| 100 ft3/s | 0.2831684659 daL/ms |
| 1,000 ft3/s | 2.831684659 daL/ms |
Reverse conversion: Decaliter per Millisecond to Cubic foot per Seconds
0.0028316847 daL/ms × 353.1466672 = 1.000000014 ft3/s
0.0028316847 decaliters per millisecond = 1.000000014 cubic foot per seconds.
cubic foot per seconds = decaliters per millisecond × 353.146667215
For a page dedicated to this direction, see Decaliter per Millisecond to Cubic foot per Seconds.
Understanding the Cubic foot per Seconds
Cubic foot per Seconds (ft3/s) measures volumetric flow rate. One cubic foot of volume passing a point every second. It is classified as a US customary flow-rate unit.
Where it's used: United States
Uses of the Cubic foot per Seconds today
- The standard unit used by the US Geological Survey for reporting river and stream discharge at gauging stations
Understanding the Decaliter per Millisecond (daL/ms)
Volumetric flow rate.
Cubic foot per Seconds — sources
- USGS Water Science School — Cubic feet per second (cfs) is the standard unit USGS uses to report streamflow.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many decaliters per millisecond are in 1 cubic foot per seconds?
1 cubic foot per seconds equals 0.0028316847 decaliters per millisecond, using the exact defined conversion factor rather than an estimate.
How do I convert cubic foot per seconds to decaliter per millisecond?
Multiply the cubic foot per seconds value by 0.002831684659. The converter above does this instantly to whatever precision you set.
How do I convert decaliter per millisecond back to cubic foot per seconds?
Use the reverse factor: 1 decaliter per millisecond equals 353.1466672 cubic foot per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a cubic foot per seconds?
Cubic foot per Seconds (ft3/s) measures volumetric flow rate. One cubic foot of volume passing a point every second. It is classified as a US customary flow-rate unit.
What is a decaliter per millisecond?
Decaliter per Millisecond (daL/ms) is a unit of flow rate.
Is the cubic foot per seconds to decaliter per millisecond conversion exact?
Yes. Both cubic foot per seconds and decaliter per millisecond are defined by fixed standards rather than physical artifacts, so the factor of 0.002831684659 used above is exact to as many digits as you choose to display.
Where is the cubic foot per seconds still used today?
United States
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.