Volumetric flow rate.
Cubic Meter per Seconds to Decaliter per Minutes Converter — m3/s to daL/min
Convert Cubic Meter per Seconds (m3/s) to Decaliter per Minutes (daL/min) using the exact conversion factor (1 cubic meter per seconds = 6,000 decaliter per minutes). See the formula, worked examples, conversion table, and common uses.
Cubic Meter per Seconds to Decaliter per Minutes converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 1 / 0.0001666666667.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Cubic Meter per Seconds to Decaliter per Minutes
Cubic Meter per Seconds and Decaliter per Minutes both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Cubic Meter per Seconds is most often used for used by hydrologists and water-resource engineers internationally to report river and reservoir discharge at large scales.
Formula
decaliter per minutes = cubic meter per seconds × 6000
This factor comes from each unit's defined relationship to the category's base unit: 1 cubic meter per seconds equals 1 base unit, and 1 decaliter per minutes equals 0.000166666666667 base units, so dividing one by the other gives the direct cubic meter per seconds-to-decaliter per minutes factor of 6000.
Simple example
1 m3/s × 6000 = 6,000 daL/min
1 cubic meter per seconds = 6,000 decaliter per minutes.
Real-world example
60 m3/s × 6000 = 360,000 daL/min
60 cubic meter per seconds = 360,000 decaliter per minutes.
Conversion table
| Cubic Meter per Seconds (m3/s) | Decaliter per Minutes (daL/min) |
|---|---|
| 0.1 m3/s | 600 daL/min |
| 1 m3/s | 6,000 daL/min |
| 10 m3/s | 60,000 daL/min |
| 60 m3/s | 360,000 daL/min |
| 100 m3/s | 600,000 daL/min |
| 1,000 m3/s | 6,000,000 daL/min |
Reverse conversion: Decaliter per Minutes to Cubic Meter per Seconds
1 daL/min × 0.0001666666667 = 0.0001666667 m3/s
1 decaliter per minutes = 0.0001666667 cubic meter per seconds.
cubic meter per seconds = decaliter per minutes × 0.000166666666667
For a page dedicated to this direction, see Decaliter per Minutes to Cubic Meter per Seconds.
Understanding the Cubic Meter per Seconds
Cubic Meter per Seconds (m3/s) measures volumetric flow rate. The SI coherent unit for volumetric flow rate — one cubic meter of volume passing a point every second. It is classified as a SI coherent derived unit.
Where it's used: Used internationally in hydrology and large-scale water-resource engineering
Uses of the Cubic Meter per Seconds today
- Used by hydrologists and water-resource engineers internationally to report river and reservoir discharge at large scales
Understanding the Decaliter per Minutes (daL/min)
Volumetric flow rate.
Cubic Meter per Seconds — sources
- BIPM SI Brochure — Cubic meter per second as the SI coherent derived unit for volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many decaliter per minutes are in 1 cubic meter per seconds?
1 cubic meter per seconds equals 6,000 decaliter per minutes, using the exact defined conversion factor rather than an estimate.
How do I convert cubic meter per seconds to decaliter per minutes?
Multiply the cubic meter per seconds value by 6000. The converter above does this instantly to whatever precision you set.
How do I convert decaliter per minutes back to cubic meter per seconds?
Use the reverse factor: 1 decaliter per minutes equals 0.0001666667 cubic meter per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a cubic meter per seconds?
Cubic Meter per Seconds (m3/s) measures volumetric flow rate. The SI coherent unit for volumetric flow rate — one cubic meter of volume passing a point every second. It is classified as a SI coherent derived unit.
What is a decaliter per minutes?
Decaliter per Minutes (daL/min) is a unit of flow rate.
Is the cubic meter per seconds to decaliter per minutes conversion exact?
Yes. Both cubic meter per seconds and decaliter per minutes are defined by fixed standards rather than physical artifacts, so the factor of 6000 used above is exact to as many digits as you choose to display.
Where is the cubic meter per seconds still used today?
Used internationally in hydrology and large-scale water-resource engineering
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.