Volumetric flow rate.
Cubic Millimeters per Millisecond to Decaliter per Minutes Converter — mm3/ms to daL/min
Convert Cubic Millimeter per Millisecond (mm3/ms) to Decaliter per Minutes (daL/min) using the exact conversion factor (1 cubic millimeter per millisecond = 0.006 decaliter per minutes). See the formula, worked examples, and conversion table.
Cubic Millimeters per Millisecond to Decaliter per Minutes converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 1e-6 / 0.0001666666667.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Cubic Millimeters per Millisecond to Decaliter per Minutes
Cubic Millimeter per Millisecond and Decaliter per Minutes both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
decaliter per minutes = cubic millimeters per millisecond × 0.006
This factor comes from each unit's defined relationship to the category's base unit: 1 cubic millimeter per millisecond equals 0.000001 base units, and 1 decaliter per minutes equals 0.000166666666667 base units, so dividing one by the other gives the direct cubic millimeter per millisecond-to-decaliter per minutes factor of 0.006.
Simple example
1 mm3/ms × 0.006 = 0.006 daL/min
1 cubic millimeter per millisecond = 0.006 decaliter per minutes.
Real-world example
60 mm3/ms × 0.006 = 0.36 daL/min
60 cubic millimeters per millisecond = 0.36 decaliter per minutes.
Conversion table
| Cubic Millimeter per Millisecond (mm3/ms) | Decaliter per Minutes (daL/min) |
|---|---|
| 0.1 mm3/ms | 0.0006 daL/min |
| 1 mm3/ms | 0.006 daL/min |
| 10 mm3/ms | 0.06 daL/min |
| 60 mm3/ms | 0.36 daL/min |
| 100 mm3/ms | 0.6 daL/min |
| 1,000 mm3/ms | 6 daL/min |
Reverse conversion: Decaliter per Minutes to Cubic Millimeter per Millisecond
0.006 daL/min × 166.6666667 = 1 mm3/ms
0.006 decaliter per minutes = 1 cubic millimeter per millisecond.
cubic millimeters per millisecond = decaliter per minutes × 166.666666667
For a page dedicated to this direction, see Decaliter per Minutes to Cubic Millimeter per Millisecond.
Understanding the Cubic Millimeter per Millisecond (mm3/ms)
Volumetric flow rate.
Understanding the Decaliter per Minutes (daL/min)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many decaliter per minutes are in 1 cubic millimeter per millisecond?
1 cubic millimeter per millisecond equals 0.006 decaliter per minutes, using the exact defined conversion factor rather than an estimate.
How do I convert cubic millimeter per millisecond to decaliter per minutes?
Multiply the cubic millimeter per millisecond value by 0.006. The converter above does this instantly to whatever precision you set.
How do I convert decaliter per minutes back to cubic millimeter per millisecond?
Use the reverse factor: 1 decaliter per minutes equals 166.6666667 cubic millimeters per millisecond. You can also use the swap control in the converter above to flip the direction instantly.
What is a cubic millimeter per millisecond?
Cubic Millimeter per Millisecond (mm3/ms) is a unit of flow rate.
What is a decaliter per minutes?
Decaliter per Minutes (daL/min) is a unit of flow rate.
Is the cubic millimeter per millisecond to decaliter per minutes conversion exact?
Yes. Both cubic millimeter per millisecond and decaliter per minutes are defined by fixed standards rather than physical artifacts, so the factor of 0.006 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.