Cubic Millimeters per Minute to Deciliters per Millisecond
Convert Cubic Millimeters per Minute to Deciliters per Millisecond instantly. Free online flow rate unit converter with exact formula, conversion table and FAQ.
Reserved for a responsive leaderboard above the conversion details.
Professional calculator style
World-scale conversion engine
30+ categories
6,500+ units
Instant results
Offline ready
Converter
Length Converter
Convert metric, imperial, and nautical distance units.
Context values
Some unit families need one extra value for a physically accurate result.
Use the converter to see the formula.
Results update instantly for Cubic Millimeters per Minute to Deciliters per Millisecond conversions.
Reserved above the conversion cards and below the converter.
Formula
dL/ms = mm3/min × 1.66667e-10
mm3/min = dL/ms ÷ 1.66667e-10
Conversion table
| 1 mm3/min | 1.66667e-10 dL/ms |
| 5 mm3/min | 8.33333e-10 dL/ms |
| 10 mm3/min | 1.66667e-9 dL/ms |
| 20 mm3/min | 3.33333e-9 dL/ms |
| 50 mm3/min | 8.33333e-9 dL/ms |
| 100 mm3/min | 1.66667e-8 dL/ms |
| 500 mm3/min | 8.33333e-8 dL/ms |
| 1000 mm3/min | 1.66667e-7 dL/ms |
Related conversions
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
What is the source unit in this conversion?
The source unit is cubic millimeters per minute (mm3/min). The Cubic Millimeter (mm3) is a unit of volume. The Minute (min) is a unit of time.
What is the destination unit in this conversion?
The destination unit is deciliters per millisecond (dL/ms). The Deciliter (dL) is a unit of volume. The Millisecond (ms) is a unit of time.
How do I convert cubic millimeters per minute to deciliters per millisecond?
Multiply the cubic millimeters per minute value by 1.66667e-10 to get deciliters per millisecond. For example, 10 mm3/min × 1.66667e-10 = 1.66667e-9 dL/ms.
Is the cubic millimeters per minute to deciliters per millisecond conversion exact?
It's exact under the SI-based volume and time definitions used here, since both units convert to cubic meters per second through fixed, non-rounded factors.
Where is this conversion commonly used?
Flow rate conversions like this are used in plumbing, HVAC, irrigation, chemical processing, fuel and water metering, and engineering flow calculations.
Can I convert deciliters per millisecond back to cubic millimeters per minute?
Yes. Divide the deciliters per millisecond value by 1.66667e-10 (or multiply by 6e+9) to get cubic millimeters per minute.
Reserved between the FAQ and the article so the page stays balanced.
About this conversion
This page converts cubic millimeters per minute (mm3/min) into deciliters per millisecond (dL/ms), two units of volumetric flow rate.
The Cubic Millimeter (mm3) is a unit of volume. The Minute (min) is a unit of time.
The Deciliter (dL) is a unit of volume. The Millisecond (ms) is a unit of time.
The formula is dL/ms = mm3/min × 1.66667e-10, based on the fixed relationship between these two flow rate units.
Flow rate is calculated as a volume unit divided by a time unit, so every combination of a volume unit and a time unit forms a valid, exact flow rate unit.