Volumetric flow rate.
Cubic Millimeter per Seconds to Hectoliter per Minutes Converter — mm3/s to hL/min
Convert Cubic Millimeter per Seconds (mm3/s) to Hectoliter per Minutes (hL/min) using the exact conversion factor (1 cubic millimeter per seconds = 6e-7 hectoliter per minutes). See the formula, worked examples, and conversion table.
Cubic Millimeter per Seconds to Hectoliter per Minutes converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 1e-9 / 0.001666666667.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Cubic Millimeter per Seconds to Hectoliter per Minutes
Cubic Millimeter per Seconds and Hectoliter per Minutes both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
hectoliter per minutes = cubic millimeter per seconds × 6e-7
This factor comes from each unit's defined relationship to the category's base unit: 1 cubic millimeter per seconds equals 1e-9 base units, and 1 hectoliter per minutes equals 0.00166666666667 base units, so dividing one by the other gives the direct cubic millimeter per seconds-to-hectoliter per minutes factor of 6e-7.
Simple example
1 mm3/s × 6e-7 = 6e-7 hL/min
1 cubic millimeter per seconds = 6e-7 hectoliter per minutes.
Real-world example
60 mm3/s × 6e-7 = 0.000036 hL/min
60 cubic millimeter per seconds = 0.000036 hectoliter per minutes.
Conversion table
| Cubic Millimeter per Seconds (mm3/s) | Hectoliter per Minutes (hL/min) |
|---|---|
| 0.1 mm3/s | 6e-8 hL/min |
| 1 mm3/s | 6e-7 hL/min |
| 10 mm3/s | 0.000006 hL/min |
| 60 mm3/s | 0.000036 hL/min |
| 100 mm3/s | 0.00006 hL/min |
| 1,000 mm3/s | 0.0006 hL/min |
Reverse conversion: Hectoliter per Minutes to Cubic Millimeter per Seconds
6e-7 hL/min × 1666666.667 = 1 mm3/s
6e-7 hectoliter per minutes = 1 cubic millimeter per seconds.
cubic millimeter per seconds = hectoliter per minutes × 1666666.66667
For a page dedicated to this direction, see Hectoliter per Minutes to Cubic Millimeter per Seconds.
Understanding the Cubic Millimeter per Seconds (mm3/s)
Volumetric flow rate.
Understanding the Hectoliter per Minutes (hL/min)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many hectoliter per minutes are in 1 cubic millimeter per seconds?
1 cubic millimeter per seconds equals 6e-7 hectoliter per minutes, using the exact defined conversion factor rather than an estimate.
How do I convert cubic millimeter per seconds to hectoliter per minutes?
Multiply the cubic millimeter per seconds value by 6e-7. The converter above does this instantly to whatever precision you set.
How do I convert hectoliter per minutes back to cubic millimeter per seconds?
Use the reverse factor: 1 hectoliter per minutes equals 1,666,666.667 cubic millimeter per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a cubic millimeter per seconds?
Cubic Millimeter per Seconds (mm3/s) is a unit of flow rate.
What is a hectoliter per minutes?
Hectoliter per Minutes (hL/min) is a unit of flow rate.
Is the cubic millimeter per seconds to hectoliter per minutes conversion exact?
Yes. Both cubic millimeter per seconds and hectoliter per minutes are defined by fixed standards rather than physical artifacts, so the factor of 6e-7 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.