Cubic Yards per Hour to Cubic Feet per Millisecond
Convert Cubic Yards per Hour to Cubic Feet per Millisecond instantly. Free online flow rate unit converter with exact formula, conversion table and FAQ.
Reserved for a responsive leaderboard above the conversion details.
Professional calculator style
World-scale conversion engine
30+ categories
6,500+ units
Instant results
Offline ready
Converter
Length Converter
Convert metric, imperial, and nautical distance units.
Context values
Some unit families need one extra value for a physically accurate result.
Use the converter to see the formula.
Results update instantly for Cubic Yards per Hour to Cubic Feet per Millisecond conversions.
Reserved above the conversion cards and below the converter.
Formula
ft3/ms = yd3/h × 7.5e-6
yd3/h = ft3/ms ÷ 7.5e-6
Conversion table
| 1 yd3/h | 7.5e-6 ft3/ms |
| 5 yd3/h | 3.75e-5 ft3/ms |
| 10 yd3/h | 7.5e-5 ft3/ms |
| 20 yd3/h | 0.00015 ft3/ms |
| 50 yd3/h | 0.000375 ft3/ms |
| 100 yd3/h | 0.00075 ft3/ms |
| 500 yd3/h | 0.00375 ft3/ms |
| 1000 yd3/h | 0.0075 ft3/ms |
Related conversions
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
What is the source unit in this conversion?
The source unit is cubic yards per hour (yd3/h). The Cubic Yard (yd3) is a unit of volume. The Hour (h) is a unit of time.
What is the destination unit in this conversion?
The destination unit is cubic feet per millisecond (ft3/ms). The Cubic Foot (ft3) is a unit of volume. The Millisecond (ms) is a unit of time.
How do I convert cubic yards per hour to cubic feet per millisecond?
Multiply the cubic yards per hour value by 7.5e-6 to get cubic feet per millisecond. For example, 10 yd3/h × 7.5e-6 = 7.5e-5 ft3/ms.
Is the cubic yards per hour to cubic feet per millisecond conversion exact?
It's exact under the SI-based volume and time definitions used here, since both units convert to cubic meters per second through fixed, non-rounded factors.
Where is this conversion commonly used?
Flow rate conversions like this are used in plumbing, HVAC, irrigation, chemical processing, fuel and water metering, and engineering flow calculations.
Can I convert cubic feet per millisecond back to cubic yards per hour?
Yes. Divide the cubic feet per millisecond value by 7.5e-6 (or multiply by 133333) to get cubic yards per hour.
Reserved between the FAQ and the article so the page stays balanced.
About this conversion
This page converts cubic yards per hour (yd3/h) into cubic feet per millisecond (ft3/ms), two units of volumetric flow rate.
The Cubic Yard (yd3) is a unit of volume. The Hour (h) is a unit of time.
The Cubic Foot (ft3) is a unit of volume. The Millisecond (ms) is a unit of time.
The formula is ft3/ms = yd3/h × 7.5e-6, based on the fixed relationship between these two flow rate units.
Flow rate is calculated as a volume unit divided by a time unit, so every combination of a volume unit and a time unit forms a valid, exact flow rate unit.