Volumetric flow rate.
Decaliters per Millisecond to Liter per Seconds Converter — daL/ms to L/s
Convert Decaliter per Millisecond (daL/ms) to Liter per Seconds (L/s) using the exact conversion factor (1 decaliter per millisecond = 10,000 liter per seconds). See the formula, worked examples, conversion table, and common uses.
Decaliters per Millisecond to Liter per Seconds converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 10 / 0.001.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Decaliters per Millisecond to Liter per Seconds
Decaliter per Millisecond and Liter per Seconds both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
liter per seconds = decaliters per millisecond × 10000
This factor comes from each unit's defined relationship to the category's base unit: 1 decaliter per millisecond equals 10 base units, and 1 liter per seconds equals 0.001 base units, so dividing one by the other gives the direct decaliter per millisecond-to-liter per seconds factor of 10000.
Simple example
1 daL/ms × 10000 = 10,000 L/s
1 decaliter per millisecond = 10,000 liter per seconds.
Real-world example
60 daL/ms × 10000 = 600,000 L/s
60 decaliters per millisecond = 600,000 liter per seconds.
Conversion table
| Decaliter per Millisecond (daL/ms) | Liter per Seconds (L/s) |
|---|---|
| 0.1 daL/ms | 1,000 L/s |
| 1 daL/ms | 10,000 L/s |
| 10 daL/ms | 100,000 L/s |
| 60 daL/ms | 600,000 L/s |
| 100 daL/ms | 1,000,000 L/s |
| 1,000 daL/ms | 10,000,000 L/s |
Reverse conversion: Liter per Seconds to Decaliter per Millisecond
1 L/s × 0.0001 = 0.0001 daL/ms
1 liter per seconds = 0.0001 decaliters per millisecond.
decaliters per millisecond = liter per seconds × 0.0001
For a page dedicated to this direction, see Liter per Seconds to Decaliter per Millisecond.
Understanding the Decaliter per Millisecond (daL/ms)
Volumetric flow rate.
Understanding the Liter per Seconds
Liter per Seconds (L/s) measures volumetric flow rate. One liter of volume passing a point every second — used for larger flows than liter-per-minute conveniently describes. It is classified as a metric derived flow-rate unit.
Where it's used: Common in municipal water-utility and industrial flow specifications internationally
L/s vs. L/min. Both measure the same quantity at different time scales; 1 L/s equals 60 L/min. L/s is typically used for larger, continuous industrial or utility flows, while L/min suits smaller household-scale flows.
Uses of the Liter per Seconds today
- Municipal water supply and treatment plant flow rates
- Industrial process flow specifications
- Stream and river discharge measurement at moderate scales
Liter per Seconds — sources
- BIPM SI Brochure — Litre and second as accepted units used together to express flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many liter per seconds are in 1 decaliter per millisecond?
1 decaliter per millisecond equals 10,000 liter per seconds, using the exact defined conversion factor rather than an estimate.
How do I convert decaliter per millisecond to liter per seconds?
Multiply the decaliter per millisecond value by 10000. The converter above does this instantly to whatever precision you set.
How do I convert liter per seconds back to decaliter per millisecond?
Use the reverse factor: 1 liter per seconds equals 0.0001 decaliters per millisecond. You can also use the swap control in the converter above to flip the direction instantly.
What is a decaliter per millisecond?
Decaliter per Millisecond (daL/ms) is a unit of flow rate.
What is a liter per seconds?
Liter per Seconds (L/s) measures volumetric flow rate. One liter of volume passing a point every second — used for larger flows than liter-per-minute conveniently describes. It is classified as a metric derived flow-rate unit.
Is the decaliter per millisecond to liter per seconds conversion exact?
Yes. Both decaliter per millisecond and liter per seconds are defined by fixed standards rather than physical artifacts, so the factor of 10000 used above is exact to as many digits as you choose to display.
What is the difference between l/s vs. l/min?
Both measure the same quantity at different time scales; 1 L/s equals 60 L/min. L/s is typically used for larger, continuous industrial or utility flows, while L/min suits smaller household-scale flows.