Volumetric flow rate.
Decaliters per Millisecond to Microliter per Hours Converter — daL/ms to uL/h
Convert Decaliter per Millisecond (daL/ms) to Microliter per Hours (uL/h) using the exact conversion factor (1 decaliter per millisecond = 3.6e+13 microliter per hours). See the formula, worked examples, and conversion table.
Decaliters per Millisecond to Microliter per Hours converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 10 / 2.77777778e-13.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Decaliters per Millisecond to Microliter per Hours
Decaliter per Millisecond and Microliter per Hours both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
microliter per hours = decaliters per millisecond × 3.6e+13
This factor comes from each unit's defined relationship to the category's base unit: 1 decaliter per millisecond equals 10 base units, and 1 microliter per hours equals 2.777778e-13 base units, so dividing one by the other gives the direct decaliter per millisecond-to-microliter per hours factor of 3.6e+13.
Simple example
1 daL/ms × 3.6e+13 = 3.6e+13 uL/h
1 decaliter per millisecond = 3.6e+13 microliter per hours.
Real-world example
60 daL/ms × 3.6e+13 = 2.16e+15 uL/h
60 decaliters per millisecond = 2.16e+15 microliter per hours.
Conversion table
| Decaliter per Millisecond (daL/ms) | Microliter per Hours (uL/h) |
|---|---|
| 0.1 daL/ms | 3.6e+12 uL/h |
| 1 daL/ms | 3.6e+13 uL/h |
| 10 daL/ms | 3.6e+14 uL/h |
| 60 daL/ms | 2.16e+15 uL/h |
| 100 daL/ms | 3.6e+15 uL/h |
| 1,000 daL/ms | 3.6e+16 uL/h |
Reverse conversion: Microliter per Hours to Decaliter per Millisecond
3.6e+13 uL/h × 2.777778e-14 = 1 daL/ms
3.6e+13 microliter per hours = 1 decaliter per millisecond.
decaliters per millisecond = microliter per hours × 2.777778e-14
For a page dedicated to this direction, see Microliter per Hours to Decaliter per Millisecond.
Understanding the Decaliter per Millisecond (daL/ms)
Volumetric flow rate.
Understanding the Microliter per Hours (uL/h)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many microliter per hours are in 1 decaliter per millisecond?
1 decaliter per millisecond equals 3.6e+13 microliter per hours, using the exact defined conversion factor rather than an estimate.
How do I convert decaliter per millisecond to microliter per hours?
Multiply the decaliter per millisecond value by 3.6e+13. The converter above does this instantly to whatever precision you set.
How do I convert microliter per hours back to decaliter per millisecond?
Use the reverse factor: 1 microliter per hours equals 2.777778e-14 decaliters per millisecond. You can also use the swap control in the converter above to flip the direction instantly.
What is a decaliter per millisecond?
Decaliter per Millisecond (daL/ms) is a unit of flow rate.
What is a microliter per hours?
Microliter per Hours (uL/h) is a unit of flow rate.
Is the decaliter per millisecond to microliter per hours conversion exact?
Yes. Both decaliter per millisecond and microliter per hours are defined by fixed standards rather than physical artifacts, so the factor of 3.6e+13 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.