Volumetric flow rate.
Decaliter per Seconds to Cubic Meter per Minutes Converter — daL/s to m3/min
Convert Decaliter per Seconds (daL/s) to Cubic Meter per Minutes (m3/min) using the exact conversion factor (1 decaliter per seconds = 0.6 cubic meter per minutes). See the formula, worked examples, and conversion table.
Decaliter per Seconds to Cubic Meter per Minutes converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.01 / 0.01666666667.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Decaliter per Seconds to Cubic Meter per Minutes
Decaliter per Seconds and Cubic Meter per Minutes both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
cubic meter per minutes = decaliter per seconds × 0.6
This factor comes from each unit's defined relationship to the category's base unit: 1 decaliter per seconds equals 0.01 base units, and 1 cubic meter per minutes equals 0.0166666666667 base units, so dividing one by the other gives the direct decaliter per seconds-to-cubic meter per minutes factor of 0.6.
Simple example
1 daL/s × 0.6 = 0.6 m3/min
1 decaliter per seconds = 0.6 cubic meter per minutes.
Real-world example
60 daL/s × 0.6 = 36 m3/min
60 decaliter per seconds = 36 cubic meter per minutes.
Conversion table
| Decaliter per Seconds (daL/s) | Cubic Meter per Minutes (m3/min) |
|---|---|
| 0.1 daL/s | 0.06 m3/min |
| 1 daL/s | 0.6 m3/min |
| 10 daL/s | 6 m3/min |
| 60 daL/s | 36 m3/min |
| 100 daL/s | 60 m3/min |
| 1,000 daL/s | 600 m3/min |
Reverse conversion: Cubic Meter per Minutes to Decaliter per Seconds
0.6 m3/min × 1.666666667 = 1 daL/s
0.6 cubic meter per minutes = 1 decaliter per seconds.
decaliter per seconds = cubic meter per minutes × 1.66666666667
For a page dedicated to this direction, see Cubic Meter per Minutes to Decaliter per Seconds.
Understanding the Decaliter per Seconds (daL/s)
Volumetric flow rate.
Understanding the Cubic Meter per Minutes (m3/min)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many cubic meter per minutes are in 1 decaliter per seconds?
1 decaliter per seconds equals 0.6 cubic meter per minutes, using the exact defined conversion factor rather than an estimate.
How do I convert decaliter per seconds to cubic meter per minutes?
Multiply the decaliter per seconds value by 0.6. The converter above does this instantly to whatever precision you set.
How do I convert cubic meter per minutes back to decaliter per seconds?
Use the reverse factor: 1 cubic meter per minutes equals 1.666666667 decaliter per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a decaliter per seconds?
Decaliter per Seconds (daL/s) is a unit of flow rate.
What is a cubic meter per minutes?
Cubic Meter per Minutes (m3/min) is a unit of flow rate.
Is the decaliter per seconds to cubic meter per minutes conversion exact?
Yes. Both decaliter per seconds and cubic meter per minutes are defined by fixed standards rather than physical artifacts, so the factor of 0.6 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.