Volumetric flow rate.
Decaliter per Seconds to Cubic Meter per Seconds Converter — daL/s to m3/s
Convert Decaliter per Seconds (daL/s) to Cubic Meter per Seconds (m3/s) using the exact conversion factor (1 decaliter per seconds = 0.01 cubic meter per seconds). See the formula, worked examples, conversion table, and common uses.
Decaliter per Seconds to Cubic Meter per Seconds converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.01 / 1.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Decaliter per Seconds to Cubic Meter per Seconds
Decaliter per Seconds and Cubic Meter per Seconds both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
cubic meter per seconds = decaliter per seconds × 0.01
This factor comes from each unit's defined relationship to the category's base unit: 1 decaliter per seconds equals 0.01 base units, and 1 cubic meter per seconds equals 1 base unit, so dividing one by the other gives the direct decaliter per seconds-to-cubic meter per seconds factor of 0.01.
Simple example
1 daL/s × 0.01 = 0.01 m3/s
1 decaliter per seconds = 0.01 cubic meter per seconds.
Real-world example
60 daL/s × 0.01 = 0.6 m3/s
60 decaliter per seconds = 0.6 cubic meter per seconds.
Conversion table
| Decaliter per Seconds (daL/s) | Cubic Meter per Seconds (m3/s) |
|---|---|
| 0.1 daL/s | 0.001 m3/s |
| 1 daL/s | 0.01 m3/s |
| 10 daL/s | 0.1 m3/s |
| 60 daL/s | 0.6 m3/s |
| 100 daL/s | 1 m3/s |
| 1,000 daL/s | 10 m3/s |
Reverse conversion: Cubic Meter per Seconds to Decaliter per Seconds
0.01 m3/s × 100 = 1 daL/s
0.01 cubic meter per seconds = 1 decaliter per seconds.
decaliter per seconds = cubic meter per seconds × 100
For a page dedicated to this direction, see Cubic Meter per Seconds to Decaliter per Seconds.
Understanding the Decaliter per Seconds (daL/s)
Volumetric flow rate.
Understanding the Cubic Meter per Seconds
Cubic Meter per Seconds (m3/s) measures volumetric flow rate. The SI coherent unit for volumetric flow rate — one cubic meter of volume passing a point every second. It is classified as a SI coherent derived unit.
Where it's used: Used internationally in hydrology and large-scale water-resource engineering
Uses of the Cubic Meter per Seconds today
- Used by hydrologists and water-resource engineers internationally to report river and reservoir discharge at large scales
Cubic Meter per Seconds — sources
- BIPM SI Brochure — Cubic meter per second as the SI coherent derived unit for volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many cubic meter per seconds are in 1 decaliter per seconds?
1 decaliter per seconds equals 0.01 cubic meter per seconds, using the exact defined conversion factor rather than an estimate.
How do I convert decaliter per seconds to cubic meter per seconds?
Multiply the decaliter per seconds value by 0.01. The converter above does this instantly to whatever precision you set.
How do I convert cubic meter per seconds back to decaliter per seconds?
Use the reverse factor: 1 cubic meter per seconds equals 100 decaliter per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a decaliter per seconds?
Decaliter per Seconds (daL/s) is a unit of flow rate.
What is a cubic meter per seconds?
Cubic Meter per Seconds (m3/s) measures volumetric flow rate. The SI coherent unit for volumetric flow rate — one cubic meter of volume passing a point every second. It is classified as a SI coherent derived unit.
Is the decaliter per seconds to cubic meter per seconds conversion exact?
Yes. Both decaliter per seconds and cubic meter per seconds are defined by fixed standards rather than physical artifacts, so the factor of 0.01 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.