Volumetric flow rate.
Decaliter per Seconds to Cubic Millimeters per Millisecond Converter — daL/s to mm3/ms
Convert Decaliter per Seconds (daL/s) to Cubic Millimeter per Millisecond (mm3/ms) using the exact conversion factor (1 decaliter per seconds = 10,000 cubic millimeter per millisecond). See the formula, worked examples, and conversion table.
Decaliter per Seconds to Cubic Millimeters per Millisecond converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.01 / 1e-6.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Decaliter per Seconds to Cubic Millimeters per Millisecond
Decaliter per Seconds and Cubic Millimeter per Millisecond both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
cubic millimeters per millisecond = decaliter per seconds × 10000
This factor comes from each unit's defined relationship to the category's base unit: 1 decaliter per seconds equals 0.01 base units, and 1 cubic millimeter per millisecond equals 0.000001 base units, so dividing one by the other gives the direct decaliter per seconds-to-cubic millimeter per millisecond factor of 10000.
Simple example
1 daL/s × 10000 = 10,000 mm3/ms
1 decaliter per seconds = 10,000 cubic millimeters per millisecond.
Real-world example
60 daL/s × 10000 = 600,000 mm3/ms
60 decaliter per seconds = 600,000 cubic millimeters per millisecond.
Conversion table
| Decaliter per Seconds (daL/s) | Cubic Millimeter per Millisecond (mm3/ms) |
|---|---|
| 0.1 daL/s | 1,000 mm3/ms |
| 1 daL/s | 10,000 mm3/ms |
| 10 daL/s | 100,000 mm3/ms |
| 60 daL/s | 600,000 mm3/ms |
| 100 daL/s | 1,000,000 mm3/ms |
| 1,000 daL/s | 10,000,000 mm3/ms |
Reverse conversion: Cubic Millimeter per Millisecond to Decaliter per Seconds
1 mm3/ms × 0.0001 = 0.0001 daL/s
1 cubic millimeter per millisecond = 0.0001 decaliter per seconds.
decaliter per seconds = cubic millimeters per millisecond × 0.0001
For a page dedicated to this direction, see Cubic Millimeter per Millisecond to Decaliter per Seconds.
Understanding the Decaliter per Seconds (daL/s)
Volumetric flow rate.
Understanding the Cubic Millimeter per Millisecond (mm3/ms)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many cubic millimeters per millisecond are in 1 decaliter per seconds?
1 decaliter per seconds equals 10,000 cubic millimeters per millisecond, using the exact defined conversion factor rather than an estimate.
How do I convert decaliter per seconds to cubic millimeter per millisecond?
Multiply the decaliter per seconds value by 10000. The converter above does this instantly to whatever precision you set.
How do I convert cubic millimeter per millisecond back to decaliter per seconds?
Use the reverse factor: 1 cubic millimeter per millisecond equals 0.0001 decaliter per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a decaliter per seconds?
Decaliter per Seconds (daL/s) is a unit of flow rate.
What is a cubic millimeter per millisecond?
Cubic Millimeter per Millisecond (mm3/ms) is a unit of flow rate.
Is the decaliter per seconds to cubic millimeter per millisecond conversion exact?
Yes. Both decaliter per seconds and cubic millimeter per millisecond are defined by fixed standards rather than physical artifacts, so the factor of 10000 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.