Volumetric flow rate.
Decaliter per Seconds to Milliliters per Millisecond Converter — daL/s to mL/ms
Convert Decaliter per Seconds (daL/s) to Milliliter per Millisecond (mL/ms) using the exact conversion factor (1 decaliter per seconds = 10 milliliter per millisecond). See the formula, worked examples, and conversion table.
Decaliter per Seconds to Milliliters per Millisecond converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.01 / 0.001.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Decaliter per Seconds to Milliliters per Millisecond
Decaliter per Seconds and Milliliter per Millisecond both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
milliliters per millisecond = decaliter per seconds × 10
This factor comes from each unit's defined relationship to the category's base unit: 1 decaliter per seconds equals 0.01 base units, and 1 milliliter per millisecond equals 0.001 base units, so dividing one by the other gives the direct decaliter per seconds-to-milliliter per millisecond factor of 10.
Simple example
1 daL/s × 10 = 10 mL/ms
1 decaliter per seconds = 10 milliliters per millisecond.
Real-world example
60 daL/s × 10 = 600 mL/ms
60 decaliter per seconds = 600 milliliters per millisecond.
Conversion table
| Decaliter per Seconds (daL/s) | Milliliter per Millisecond (mL/ms) |
|---|---|
| 0.1 daL/s | 1 mL/ms |
| 1 daL/s | 10 mL/ms |
| 10 daL/s | 100 mL/ms |
| 60 daL/s | 600 mL/ms |
| 100 daL/s | 1,000 mL/ms |
| 1,000 daL/s | 10,000 mL/ms |
Reverse conversion: Milliliter per Millisecond to Decaliter per Seconds
10 mL/ms × 0.1 = 1 daL/s
10 milliliters per millisecond = 1 decaliter per seconds.
decaliter per seconds = milliliters per millisecond × 0.1
For a page dedicated to this direction, see Milliliter per Millisecond to Decaliter per Seconds.
Understanding the Decaliter per Seconds (daL/s)
Volumetric flow rate.
Understanding the Milliliter per Millisecond (mL/ms)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many milliliters per millisecond are in 1 decaliter per seconds?
1 decaliter per seconds equals 10 milliliters per millisecond, using the exact defined conversion factor rather than an estimate.
How do I convert decaliter per seconds to milliliter per millisecond?
Multiply the decaliter per seconds value by 10. The converter above does this instantly to whatever precision you set.
How do I convert milliliter per millisecond back to decaliter per seconds?
Use the reverse factor: 1 milliliter per millisecond equals 0.1 decaliter per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a decaliter per seconds?
Decaliter per Seconds (daL/s) is a unit of flow rate.
What is a milliliter per millisecond?
Milliliter per Millisecond (mL/ms) is a unit of flow rate.
Is the decaliter per seconds to milliliter per millisecond conversion exact?
Yes. Both decaliter per seconds and milliliter per millisecond are defined by fixed standards rather than physical artifacts, so the factor of 10 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.