Volumetric flow rate.
Deciliters per Millisecond to Cubic Centimeters per Millisecond Converter — dL/ms to cm3/ms
Convert Deciliter per Millisecond (dL/ms) to Cubic Centimeter per Millisecond (cm3/ms) using the exact conversion factor (1 deciliter per millisecond = 100 cubic centimeter per millisecond). See the formula, worked examples, and conversion table.
Deciliters per Millisecond to Cubic Centimeters per Millisecond converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.1 / 0.001.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Deciliters per Millisecond to Cubic Centimeters per Millisecond
Deciliter per Millisecond and Cubic Centimeter per Millisecond both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
cubic centimeters per millisecond = deciliters per millisecond × 100
This factor comes from each unit's defined relationship to the category's base unit: 1 deciliter per millisecond equals 0.1 base units, and 1 cubic centimeter per millisecond equals 0.001 base units, so dividing one by the other gives the direct deciliter per millisecond-to-cubic centimeter per millisecond factor of 100.
Simple example
1 dL/ms × 100 = 100 cm3/ms
1 deciliter per millisecond = 100 cubic centimeters per millisecond.
Real-world example
60 dL/ms × 100 = 6,000 cm3/ms
60 deciliters per millisecond = 6,000 cubic centimeters per millisecond.
Conversion table
| Deciliter per Millisecond (dL/ms) | Cubic Centimeter per Millisecond (cm3/ms) |
|---|---|
| 0.1 dL/ms | 10 cm3/ms |
| 1 dL/ms | 100 cm3/ms |
| 10 dL/ms | 1,000 cm3/ms |
| 60 dL/ms | 6,000 cm3/ms |
| 100 dL/ms | 10,000 cm3/ms |
| 1,000 dL/ms | 100,000 cm3/ms |
Reverse conversion: Cubic Centimeter per Millisecond to Deciliter per Millisecond
100 cm3/ms × 0.01 = 1 dL/ms
100 cubic centimeters per millisecond = 1 deciliters per millisecond.
deciliters per millisecond = cubic centimeters per millisecond × 0.01
For a page dedicated to this direction, see Cubic Centimeter per Millisecond to Deciliter per Millisecond.
Understanding the Deciliter per Millisecond (dL/ms)
Volumetric flow rate.
Understanding the Cubic Centimeter per Millisecond (cm3/ms)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many cubic centimeters per millisecond are in 1 deciliter per millisecond?
1 deciliter per millisecond equals 100 cubic centimeters per millisecond, using the exact defined conversion factor rather than an estimate.
How do I convert deciliter per millisecond to cubic centimeter per millisecond?
Multiply the deciliter per millisecond value by 100. The converter above does this instantly to whatever precision you set.
How do I convert cubic centimeter per millisecond back to deciliter per millisecond?
Use the reverse factor: 1 cubic centimeter per millisecond equals 0.01 deciliters per millisecond. You can also use the swap control in the converter above to flip the direction instantly.
What is a deciliter per millisecond?
Deciliter per Millisecond (dL/ms) is a unit of flow rate.
What is a cubic centimeter per millisecond?
Cubic Centimeter per Millisecond (cm3/ms) is a unit of flow rate.
Is the deciliter per millisecond to cubic centimeter per millisecond conversion exact?
Yes. Both deciliter per millisecond and cubic centimeter per millisecond are defined by fixed standards rather than physical artifacts, so the factor of 100 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.