Volumetric flow rate.
Deciliters per Millisecond to Cubic Centimeter per Seconds Converter — dL/ms to cm3/s
Convert Deciliter per Millisecond (dL/ms) to Cubic Centimeter per Seconds (cm3/s) using the exact conversion factor (1 deciliter per millisecond = 100,000 cubic centimeter per seconds). See the formula, worked examples, and conversion table.
Deciliters per Millisecond to Cubic Centimeter per Seconds converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.1 / 1e-6.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Deciliters per Millisecond to Cubic Centimeter per Seconds
Deciliter per Millisecond and Cubic Centimeter per Seconds both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
cubic centimeter per seconds = deciliters per millisecond × 100000
This factor comes from each unit's defined relationship to the category's base unit: 1 deciliter per millisecond equals 0.1 base units, and 1 cubic centimeter per seconds equals 0.000001 base units, so dividing one by the other gives the direct deciliter per millisecond-to-cubic centimeter per seconds factor of 100000.
Simple example
1 dL/ms × 100000 = 100,000 cm3/s
1 deciliter per millisecond = 100,000 cubic centimeter per seconds.
Real-world example
60 dL/ms × 100000 = 6,000,000 cm3/s
60 deciliters per millisecond = 6,000,000 cubic centimeter per seconds.
Conversion table
| Deciliter per Millisecond (dL/ms) | Cubic Centimeter per Seconds (cm3/s) |
|---|---|
| 0.1 dL/ms | 10,000 cm3/s |
| 1 dL/ms | 100,000 cm3/s |
| 10 dL/ms | 1,000,000 cm3/s |
| 60 dL/ms | 6,000,000 cm3/s |
| 100 dL/ms | 10,000,000 cm3/s |
| 1,000 dL/ms | 100,000,000 cm3/s |
Reverse conversion: Cubic Centimeter per Seconds to Deciliter per Millisecond
1 cm3/s × 0.00001 = 0.00001 dL/ms
1 cubic centimeter per seconds = 0.00001 deciliters per millisecond.
deciliters per millisecond = cubic centimeter per seconds × 0.00001
For a page dedicated to this direction, see Cubic Centimeter per Seconds to Deciliter per Millisecond.
Understanding the Deciliter per Millisecond (dL/ms)
Volumetric flow rate.
Understanding the Cubic Centimeter per Seconds (cm3/s)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many cubic centimeter per seconds are in 1 deciliter per millisecond?
1 deciliter per millisecond equals 100,000 cubic centimeter per seconds, using the exact defined conversion factor rather than an estimate.
How do I convert deciliter per millisecond to cubic centimeter per seconds?
Multiply the deciliter per millisecond value by 100000. The converter above does this instantly to whatever precision you set.
How do I convert cubic centimeter per seconds back to deciliter per millisecond?
Use the reverse factor: 1 cubic centimeter per seconds equals 0.00001 deciliters per millisecond. You can also use the swap control in the converter above to flip the direction instantly.
What is a deciliter per millisecond?
Deciliter per Millisecond (dL/ms) is a unit of flow rate.
What is a cubic centimeter per seconds?
Cubic Centimeter per Seconds (cm3/s) is a unit of flow rate.
Is the deciliter per millisecond to cubic centimeter per seconds conversion exact?
Yes. Both deciliter per millisecond and cubic centimeter per seconds are defined by fixed standards rather than physical artifacts, so the factor of 100000 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.