Volumetric flow rate.
Deciliters per Millisecond to Cubic Meter per Minutes Converter — dL/ms to m3/min
Convert Deciliter per Millisecond (dL/ms) to Cubic Meter per Minutes (m3/min) using the exact conversion factor (1 deciliter per millisecond = 6 cubic meter per minutes). See the formula, worked examples, and conversion table.
Deciliters per Millisecond to Cubic Meter per Minutes converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.1 / 0.01666666667.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Deciliters per Millisecond to Cubic Meter per Minutes
Deciliter per Millisecond and Cubic Meter per Minutes both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
cubic meter per minutes = deciliters per millisecond × 6
This factor comes from each unit's defined relationship to the category's base unit: 1 deciliter per millisecond equals 0.1 base units, and 1 cubic meter per minutes equals 0.0166666666667 base units, so dividing one by the other gives the direct deciliter per millisecond-to-cubic meter per minutes factor of 6.
Simple example
1 dL/ms × 6 = 6 m3/min
1 deciliter per millisecond = 6 cubic meter per minutes.
Real-world example
60 dL/ms × 6 = 360 m3/min
60 deciliters per millisecond = 360 cubic meter per minutes.
Conversion table
| Deciliter per Millisecond (dL/ms) | Cubic Meter per Minutes (m3/min) |
|---|---|
| 0.1 dL/ms | 0.6 m3/min |
| 1 dL/ms | 6 m3/min |
| 10 dL/ms | 60 m3/min |
| 60 dL/ms | 360 m3/min |
| 100 dL/ms | 600 m3/min |
| 1,000 dL/ms | 6,000 m3/min |
Reverse conversion: Cubic Meter per Minutes to Deciliter per Millisecond
6 m3/min × 0.1666666667 = 1 dL/ms
6 cubic meter per minutes = 1 deciliter per millisecond.
deciliters per millisecond = cubic meter per minutes × 0.166666666667
For a page dedicated to this direction, see Cubic Meter per Minutes to Deciliter per Millisecond.
Understanding the Deciliter per Millisecond (dL/ms)
Volumetric flow rate.
Understanding the Cubic Meter per Minutes (m3/min)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many cubic meter per minutes are in 1 deciliter per millisecond?
1 deciliter per millisecond equals 6 cubic meter per minutes, using the exact defined conversion factor rather than an estimate.
How do I convert deciliter per millisecond to cubic meter per minutes?
Multiply the deciliter per millisecond value by 6. The converter above does this instantly to whatever precision you set.
How do I convert cubic meter per minutes back to deciliter per millisecond?
Use the reverse factor: 1 cubic meter per minutes equals 0.1666666667 deciliters per millisecond. You can also use the swap control in the converter above to flip the direction instantly.
What is a deciliter per millisecond?
Deciliter per Millisecond (dL/ms) is a unit of flow rate.
What is a cubic meter per minutes?
Cubic Meter per Minutes (m3/min) is a unit of flow rate.
Is the deciliter per millisecond to cubic meter per minutes conversion exact?
Yes. Both deciliter per millisecond and cubic meter per minutes are defined by fixed standards rather than physical artifacts, so the factor of 6 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.