Volumetric flow rate.
Deciliters per Millisecond to Cubic Meter per Seconds Converter — dL/ms to m3/s
Convert Deciliter per Millisecond (dL/ms) to Cubic Meter per Seconds (m3/s) using the exact conversion factor (1 deciliter per millisecond = 0.1 cubic meter per seconds). See the formula, worked examples, conversion table, and common uses.
Deciliters per Millisecond to Cubic Meter per Seconds converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.1 / 1.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Deciliters per Millisecond to Cubic Meter per Seconds
Deciliter per Millisecond and Cubic Meter per Seconds both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
cubic meter per seconds = deciliters per millisecond × 0.1
This factor comes from each unit's defined relationship to the category's base unit: 1 deciliter per millisecond equals 0.1 base units, and 1 cubic meter per seconds equals 1 base unit, so dividing one by the other gives the direct deciliter per millisecond-to-cubic meter per seconds factor of 0.1.
Simple example
1 dL/ms × 0.1 = 0.1 m3/s
1 deciliter per millisecond = 0.1 cubic meter per seconds.
Real-world example
60 dL/ms × 0.1 = 6 m3/s
60 deciliters per millisecond = 6 cubic meter per seconds.
Conversion table
| Deciliter per Millisecond (dL/ms) | Cubic Meter per Seconds (m3/s) |
|---|---|
| 0.1 dL/ms | 0.01 m3/s |
| 1 dL/ms | 0.1 m3/s |
| 10 dL/ms | 1 m3/s |
| 60 dL/ms | 6 m3/s |
| 100 dL/ms | 10 m3/s |
| 1,000 dL/ms | 100 m3/s |
Reverse conversion: Cubic Meter per Seconds to Deciliter per Millisecond
0.1 m3/s × 10 = 1 dL/ms
0.1 cubic meter per seconds = 1 deciliter per millisecond.
deciliters per millisecond = cubic meter per seconds × 10
For a page dedicated to this direction, see Cubic Meter per Seconds to Deciliter per Millisecond.
Understanding the Deciliter per Millisecond (dL/ms)
Volumetric flow rate.
Understanding the Cubic Meter per Seconds
Cubic Meter per Seconds (m3/s) measures volumetric flow rate. The SI coherent unit for volumetric flow rate — one cubic meter of volume passing a point every second. It is classified as a SI coherent derived unit.
Where it's used: Used internationally in hydrology and large-scale water-resource engineering
Uses of the Cubic Meter per Seconds today
- Used by hydrologists and water-resource engineers internationally to report river and reservoir discharge at large scales
Cubic Meter per Seconds — sources
- BIPM SI Brochure — Cubic meter per second as the SI coherent derived unit for volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many cubic meter per seconds are in 1 deciliter per millisecond?
1 deciliter per millisecond equals 0.1 cubic meter per seconds, using the exact defined conversion factor rather than an estimate.
How do I convert deciliter per millisecond to cubic meter per seconds?
Multiply the deciliter per millisecond value by 0.1. The converter above does this instantly to whatever precision you set.
How do I convert cubic meter per seconds back to deciliter per millisecond?
Use the reverse factor: 1 cubic meter per seconds equals 10 deciliters per millisecond. You can also use the swap control in the converter above to flip the direction instantly.
What is a deciliter per millisecond?
Deciliter per Millisecond (dL/ms) is a unit of flow rate.
What is a cubic meter per seconds?
Cubic Meter per Seconds (m3/s) measures volumetric flow rate. The SI coherent unit for volumetric flow rate — one cubic meter of volume passing a point every second. It is classified as a SI coherent derived unit.
Is the deciliter per millisecond to cubic meter per seconds conversion exact?
Yes. Both deciliter per millisecond and cubic meter per seconds are defined by fixed standards rather than physical artifacts, so the factor of 0.1 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.