Volumetric flow rate.
Deciliter per Seconds to Kiloliters per Millisecond Converter — dL/s to kL/ms
Convert Deciliter per Seconds (dL/s) to Kiloliter per Millisecond (kL/ms) using the exact conversion factor (1 deciliter per seconds = 1e-7 kiloliter per millisecond). See the formula, worked examples, and conversion table.
Deciliter per Seconds to Kiloliters per Millisecond converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.0001 / 1000.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Deciliter per Seconds to Kiloliters per Millisecond
Deciliter per Seconds and Kiloliter per Millisecond both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
kiloliters per millisecond = deciliter per seconds × 1e-7
This factor comes from each unit's defined relationship to the category's base unit: 1 deciliter per seconds equals 0.0001 base units, and 1 kiloliter per millisecond equals 1000 base units, so dividing one by the other gives the direct deciliter per seconds-to-kiloliter per millisecond factor of 1e-7.
Simple example
1 dL/s × 1e-7 = 1e-7 kL/ms
1 deciliter per seconds = 1e-7 kiloliters per millisecond.
Real-world example
60 dL/s × 1e-7 = 0.000006 kL/ms
60 deciliter per seconds = 0.000006 kiloliters per millisecond.
Conversion table
| Deciliter per Seconds (dL/s) | Kiloliter per Millisecond (kL/ms) |
|---|---|
| 0.1 dL/s | 1e-8 kL/ms |
| 1 dL/s | 1e-7 kL/ms |
| 10 dL/s | 0.000001 kL/ms |
| 60 dL/s | 0.000006 kL/ms |
| 100 dL/s | 0.00001 kL/ms |
| 1,000 dL/s | 0.0001 kL/ms |
Reverse conversion: Kiloliter per Millisecond to Deciliter per Seconds
1e-7 kL/ms × 10000000 = 1 dL/s
1e-7 kiloliters per millisecond = 1 deciliter per seconds.
deciliter per seconds = kiloliters per millisecond × 10000000
For a page dedicated to this direction, see Kiloliter per Millisecond to Deciliter per Seconds.
Understanding the Deciliter per Seconds (dL/s)
Volumetric flow rate.
Understanding the Kiloliter per Millisecond (kL/ms)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many kiloliters per millisecond are in 1 deciliter per seconds?
1 deciliter per seconds equals 1e-7 kiloliters per millisecond, using the exact defined conversion factor rather than an estimate.
How do I convert deciliter per seconds to kiloliter per millisecond?
Multiply the deciliter per seconds value by 1e-7. The converter above does this instantly to whatever precision you set.
How do I convert kiloliter per millisecond back to deciliter per seconds?
Use the reverse factor: 1 kiloliter per millisecond equals 10,000,000 deciliter per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a deciliter per seconds?
Deciliter per Seconds (dL/s) is a unit of flow rate.
What is a kiloliter per millisecond?
Kiloliter per Millisecond (kL/ms) is a unit of flow rate.
Is the deciliter per seconds to kiloliter per millisecond conversion exact?
Yes. Both deciliter per seconds and kiloliter per millisecond are defined by fixed standards rather than physical artifacts, so the factor of 1e-7 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.