Volumetric flow rate.
Deciliter per Seconds to Microliter per Seconds Converter — dL/s to uL/s
Convert Deciliter per Seconds (dL/s) to Microliter per Seconds (uL/s) using the exact conversion factor (1 deciliter per seconds = 100,000 microliter per seconds). See the formula, worked examples, and conversion table.
Deciliter per Seconds to Microliter per Seconds converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.0001 / 1e-9.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Deciliter per Seconds to Microliter per Seconds
Deciliter per Seconds and Microliter per Seconds both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
microliter per seconds = deciliter per seconds × 100000
This factor comes from each unit's defined relationship to the category's base unit: 1 deciliter per seconds equals 0.0001 base units, and 1 microliter per seconds equals 1e-9 base units, so dividing one by the other gives the direct deciliter per seconds-to-microliter per seconds factor of 100000.
Simple example
1 dL/s × 100000 = 100,000 uL/s
1 deciliter per seconds = 100,000 microliter per seconds.
Real-world example
60 dL/s × 100000 = 6,000,000 uL/s
60 deciliter per seconds = 6,000,000 microliter per seconds.
Conversion table
| Deciliter per Seconds (dL/s) | Microliter per Seconds (uL/s) |
|---|---|
| 0.1 dL/s | 10,000 uL/s |
| 1 dL/s | 100,000 uL/s |
| 10 dL/s | 1,000,000 uL/s |
| 60 dL/s | 6,000,000 uL/s |
| 100 dL/s | 10,000,000 uL/s |
| 1,000 dL/s | 100,000,000 uL/s |
Reverse conversion: Microliter per Seconds to Deciliter per Seconds
1 uL/s × 0.00001 = 0.00001 dL/s
1 microliter per seconds = 0.00001 deciliter per seconds.
deciliter per seconds = microliter per seconds × 0.00001
For a page dedicated to this direction, see Microliter per Seconds to Deciliter per Seconds.
Understanding the Deciliter per Seconds (dL/s)
Volumetric flow rate.
Understanding the Microliter per Seconds (uL/s)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many microliter per seconds are in 1 deciliter per seconds?
1 deciliter per seconds equals 100,000 microliter per seconds, using the exact defined conversion factor rather than an estimate.
How do I convert deciliter per seconds to microliter per seconds?
Multiply the deciliter per seconds value by 100000. The converter above does this instantly to whatever precision you set.
How do I convert microliter per seconds back to deciliter per seconds?
Use the reverse factor: 1 microliter per seconds equals 0.00001 deciliter per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a deciliter per seconds?
Deciliter per Seconds (dL/s) is a unit of flow rate.
What is a microliter per seconds?
Microliter per Seconds (uL/s) is a unit of flow rate.
Is the deciliter per seconds to microliter per seconds conversion exact?
Yes. Both deciliter per seconds and microliter per seconds are defined by fixed standards rather than physical artifacts, so the factor of 100000 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.