Volumetric flow rate.
Gallon per Seconds to Cubic inches per Millisecond Converter — gal/s to in3/ms
Convert Gallon per Seconds (gal/s) to Cubic inch per Millisecond (in3/ms) using the exact conversion factor (1 gallon per seconds = 0.231 cubic inch per millisecond). See the formula, worked examples, and conversion table.
Gallon per Seconds to Cubic inches per Millisecond converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.003785411784 / 0.016387064.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Gallon per Seconds to Cubic inches per Millisecond
Gallon per Seconds and Cubic inch per Millisecond both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
cubic inches per millisecond = gallon per seconds × 0.231
This factor comes from each unit's defined relationship to the category's base unit: 1 gallon per seconds equals 0.003785411784 base units, and 1 cubic inch per millisecond equals 0.016387064 base units, so dividing one by the other gives the direct gallon per seconds-to-cubic inch per millisecond factor of 0.231.
Simple example
1 gal/s × 0.231 = 0.231 in3/ms
1 gallon per seconds = 0.231 cubic inches per millisecond.
Real-world example
60 gal/s × 0.231 = 13.86 in3/ms
60 gallon per seconds = 13.86 cubic inches per millisecond.
Conversion table
| Gallon per Seconds (gal/s) | Cubic inch per Millisecond (in3/ms) |
|---|---|
| 0.1 gal/s | 0.0231 in3/ms |
| 1 gal/s | 0.231 in3/ms |
| 10 gal/s | 2.31 in3/ms |
| 60 gal/s | 13.86 in3/ms |
| 100 gal/s | 23.1 in3/ms |
| 1,000 gal/s | 231 in3/ms |
Reverse conversion: Cubic inch per Millisecond to Gallon per Seconds
0.231 in3/ms × 4.329004329 = 1 gal/s
0.231 cubic inches per millisecond = 1 gallon per seconds.
gallon per seconds = cubic inches per millisecond × 4.329004329
For a page dedicated to this direction, see Cubic inch per Millisecond to Gallon per Seconds.
Understanding the Gallon per Seconds (gal/s)
Volumetric flow rate.
Understanding the Cubic inch per Millisecond (in3/ms)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many cubic inches per millisecond are in 1 gallon per seconds?
1 gallon per seconds equals 0.231 cubic inches per millisecond, using the exact defined conversion factor rather than an estimate.
How do I convert gallon per seconds to cubic inch per millisecond?
Multiply the gallon per seconds value by 0.231. The converter above does this instantly to whatever precision you set.
How do I convert cubic inch per millisecond back to gallon per seconds?
Use the reverse factor: 1 cubic inch per millisecond equals 4.329004329 gallon per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a gallon per seconds?
Gallon per Seconds (gal/s) is a unit of flow rate.
What is a cubic inch per millisecond?
Cubic inch per Millisecond (in3/ms) is a unit of flow rate.
Is the gallon per seconds to cubic inch per millisecond conversion exact?
Yes. Both gallon per seconds and cubic inch per millisecond are defined by fixed standards rather than physical artifacts, so the factor of 0.231 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.