Volumetric flow rate.
Liter per Seconds to Imperial fluid ounces per Millisecond Converter — L/s to imp fl oz/ms
Convert Liter per Seconds (L/s) to Imperial fluid ounce per Millisecond (imp fl oz/ms) using the exact conversion factor (1 liter per seconds = 0.0351950797 imperial fluid ounce per millisecond). See the formula, worked examples, conversion table, and common uses.
Liter per Seconds to Imperial fluid ounces per Millisecond converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.001 / 0.0284130625.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Liter per Seconds to Imperial fluid ounces per Millisecond
Liter per Seconds and Imperial fluid ounce per Millisecond both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Liter per Seconds is most often used for municipal water supply and treatment plant flow rates.
Formula
imperial fluid ounces per millisecond = liter per seconds × 0.0351950797279
This factor comes from each unit's defined relationship to the category's base unit: 1 liter per seconds equals 0.001 base units, and 1 imperial fluid ounce per millisecond equals 0.0284130625 base units, so dividing one by the other gives the direct liter per seconds-to-imperial fluid ounce per millisecond factor of 0.0351950797279.
Simple example
1 L/s × 0.03519507973 = 0.0351950797 imp fl oz/ms
1 liter per seconds = 0.0351950797 imperial fluid ounces per millisecond.
Real-world example
60 L/s × 0.03519507973 = 2.111704784 imp fl oz/ms
60 liter per seconds = 2.111704784 imperial fluid ounces per millisecond.
Conversion table
| Liter per Seconds (L/s) | Imperial fluid ounce per Millisecond (imp fl oz/ms) |
|---|---|
| 0.1 L/s | 0.003519508 imp fl oz/ms |
| 1 L/s | 0.0351950797 imp fl oz/ms |
| 10 L/s | 0.3519507973 imp fl oz/ms |
| 60 L/s | 2.111704784 imp fl oz/ms |
| 100 L/s | 3.519507973 imp fl oz/ms |
| 1,000 L/s | 35.19507973 imp fl oz/ms |
Reverse conversion: Imperial fluid ounce per Millisecond to Liter per Seconds
0.0351950797 imp fl oz/ms × 28.4130625 = 0.9999999992 L/s
0.0351950797 imperial fluid ounces per millisecond = 0.9999999992 liter per seconds.
liter per seconds = imperial fluid ounces per millisecond × 28.4130625
For a page dedicated to this direction, see Imperial fluid ounce per Millisecond to Liter per Seconds.
Understanding the Liter per Seconds
Liter per Seconds (L/s) measures volumetric flow rate. One liter of volume passing a point every second — used for larger flows than liter-per-minute conveniently describes. It is classified as a metric derived flow-rate unit.
Where it's used: Common in municipal water-utility and industrial flow specifications internationally
L/s vs. L/min. Both measure the same quantity at different time scales; 1 L/s equals 60 L/min. L/s is typically used for larger, continuous industrial or utility flows, while L/min suits smaller household-scale flows.
Uses of the Liter per Seconds today
- Municipal water supply and treatment plant flow rates
- Industrial process flow specifications
- Stream and river discharge measurement at moderate scales
Understanding the Imperial fluid ounce per Millisecond (imp fl oz/ms)
Volumetric flow rate.
Liter per Seconds — sources
- BIPM SI Brochure — Litre and second as accepted units used together to express flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many imperial fluid ounces per millisecond are in 1 liter per seconds?
1 liter per seconds equals 0.0351950797 imperial fluid ounces per millisecond, using the exact defined conversion factor rather than an estimate.
How do I convert liter per seconds to imperial fluid ounce per millisecond?
Multiply the liter per seconds value by 0.03519507973. The converter above does this instantly to whatever precision you set.
How do I convert imperial fluid ounce per millisecond back to liter per seconds?
Use the reverse factor: 1 imperial fluid ounce per millisecond equals 28.4130625 liter per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a liter per seconds?
Liter per Seconds (L/s) measures volumetric flow rate. One liter of volume passing a point every second — used for larger flows than liter-per-minute conveniently describes. It is classified as a metric derived flow-rate unit.
What is a imperial fluid ounce per millisecond?
Imperial fluid ounce per Millisecond (imp fl oz/ms) is a unit of flow rate.
Is the liter per seconds to imperial fluid ounce per millisecond conversion exact?
Yes. Both liter per seconds and imperial fluid ounce per millisecond are defined by fixed standards rather than physical artifacts, so the factor of 0.03519507973 used above is exact to as many digits as you choose to display.
What is the difference between l/s vs. l/min?
Both measure the same quantity at different time scales; 1 L/s equals 60 L/min. L/s is typically used for larger, continuous industrial or utility flows, while L/min suits smaller household-scale flows.
Where is the liter per seconds still used today?
Common in municipal water-utility and industrial flow specifications internationally