Volumetric flow rate.
Microliter per Seconds to Cubic Centimeter per Hours Converter — uL/s to cm3/h
Convert Microliter per Seconds (uL/s) to Cubic Centimeter per Hours (cm3/h) using the exact conversion factor (1 microliter per seconds = 3.6 cubic centimeter per hours). See the formula, worked examples, and conversion table.
Microliter per Seconds to Cubic Centimeter per Hours converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 1e-9 / 2.77777778e-10.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Microliter per Seconds to Cubic Centimeter per Hours
Microliter per Seconds and Cubic Centimeter per Hours both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
cubic centimeter per hours = microliter per seconds × 3.6
This factor comes from each unit's defined relationship to the category's base unit: 1 microliter per seconds equals 1e-9 base units, and 1 cubic centimeter per hours equals 2.777778e-10 base units, so dividing one by the other gives the direct microliter per seconds-to-cubic centimeter per hours factor of 3.6.
Simple example
1 uL/s × 3.6 = 3.6 cm3/h
1 microliter per seconds = 3.6 cubic centimeter per hours.
Real-world example
60 uL/s × 3.6 = 216 cm3/h
60 microliter per seconds = 216 cubic centimeter per hours.
Conversion table
| Microliter per Seconds (uL/s) | Cubic Centimeter per Hours (cm3/h) |
|---|---|
| 0.1 uL/s | 0.36 cm3/h |
| 1 uL/s | 3.6 cm3/h |
| 10 uL/s | 36 cm3/h |
| 60 uL/s | 216 cm3/h |
| 100 uL/s | 360 cm3/h |
| 1,000 uL/s | 3,600 cm3/h |
Reverse conversion: Cubic Centimeter per Hours to Microliter per Seconds
3.6 cm3/h × 0.2777777778 = 1 uL/s
3.6 cubic centimeter per hours = 1 microliter per seconds.
microliter per seconds = cubic centimeter per hours × 0.277777777778
For a page dedicated to this direction, see Cubic Centimeter per Hours to Microliter per Seconds.
Understanding the Microliter per Seconds (uL/s)
Volumetric flow rate.
Understanding the Cubic Centimeter per Hours (cm3/h)
Volumetric flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many cubic centimeter per hours are in 1 microliter per seconds?
1 microliter per seconds equals 3.6 cubic centimeter per hours, using the exact defined conversion factor rather than an estimate.
How do I convert microliter per seconds to cubic centimeter per hours?
Multiply the microliter per seconds value by 3.6. The converter above does this instantly to whatever precision you set.
How do I convert cubic centimeter per hours back to microliter per seconds?
Use the reverse factor: 1 cubic centimeter per hours equals 0.2777777778 microliter per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a microliter per seconds?
Microliter per Seconds (uL/s) is a unit of flow rate.
What is a cubic centimeter per hours?
Cubic Centimeter per Hours (cm3/h) is a unit of flow rate.
Is the microliter per seconds to cubic centimeter per hours conversion exact?
Yes. Both microliter per seconds and cubic centimeter per hours are defined by fixed standards rather than physical artifacts, so the factor of 3.6 used above is exact to as many digits as you choose to display.
What's the difference between volumetric and mass flow rate?
Volumetric flow rate measures the volume of fluid passing a point per unit time (for example, liters per second). Mass flow rate measures the mass instead. For a fluid of constant density the two are directly proportional, but for compressible fluids like gases, mass flow is often the more meaningful quantity.