US Pints per Second to Cubic Inches per Millisecond
Convert US Pints per Second to Cubic Inches per Millisecond instantly. Free online flow rate unit converter with exact formula, conversion table and FAQ.
Reserved for a responsive leaderboard above the conversion details.
Professional calculator style
World-scale conversion engine
30+ categories
6,500+ units
Instant results
Offline ready
Converter
Length Converter
Convert metric, imperial, and nautical distance units.
Context values
Some unit families need one extra value for a physically accurate result.
Use the converter to see the formula.
Results update instantly for US Pints per Second to Cubic Inches per Millisecond conversions.
Reserved above the conversion cards and below the converter.
Formula
in3/ms = pt/s × 0.028875
pt/s = in3/ms ÷ 0.028875
Conversion table
| 1 pt/s | 0.028875 in3/ms |
| 5 pt/s | 0.144375 in3/ms |
| 10 pt/s | 0.28875 in3/ms |
| 20 pt/s | 0.5775 in3/ms |
| 50 pt/s | 1.44375 in3/ms |
| 100 pt/s | 2.8875 in3/ms |
| 500 pt/s | 14.4375 in3/ms |
| 1000 pt/s | 28.875 in3/ms |
Related conversions
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
What is the source unit in this conversion?
The source unit is us pints per second (pt/s). The US Pint (pt) is a unit of volume. The Second (s) is a unit of time.
What is the destination unit in this conversion?
The destination unit is cubic inches per millisecond (in3/ms). The Cubic Inch (in3) is a unit of volume. The Millisecond (ms) is a unit of time.
How do I convert us pints per second to cubic inches per millisecond?
Multiply the us pints per second value by 0.028875 to get cubic inches per millisecond. For example, 10 pt/s × 0.028875 = 0.28875 in3/ms.
Is the us pints per second to cubic inches per millisecond conversion exact?
It's exact under the SI-based volume and time definitions used here, since both units convert to cubic meters per second through fixed, non-rounded factors.
Where is this conversion commonly used?
Flow rate conversions like this are used in plumbing, HVAC, irrigation, chemical processing, fuel and water metering, and engineering flow calculations.
Can I convert cubic inches per millisecond back to us pints per second?
Yes. Divide the cubic inches per millisecond value by 0.028875 (or multiply by 34.632) to get us pints per second.
Reserved between the FAQ and the article so the page stays balanced.
About this conversion
This page converts us pints per second (pt/s) into cubic inches per millisecond (in3/ms), two units of volumetric flow rate.
The US Pint (pt) is a unit of volume. The Second (s) is a unit of time.
The Cubic Inch (in3) is a unit of volume. The Millisecond (ms) is a unit of time.
The formula is in3/ms = pt/s × 0.028875, based on the fixed relationship between these two flow rate units.
Flow rate is calculated as a volume unit divided by a time unit, so every combination of a volume unit and a time unit forms a valid, exact flow rate unit.