Gigafarad is 1000000000 farad units.
Gigafarads to Nanofarads Converter — GF to nF
Convert Gigafarad (GF) to Nanofarad (nF) using the exact conversion factor (1 gigafarad = 1e+18 nanofarad). See the formula, worked examples, and conversion table.
Gigafarads to Nanofarads converter
Converter
Electricity Converter
Convert electrical units by family and calculate voltage, current, resistance, power, and energy with context values.
Context values
Some unit families need one extra value for a physically accurate result.
Nanofarad is 1e-9 farad units.
Result = input x 1e+9 / 1e-9.
Electrical units in the same family convert directly.
Reserved above the conversion cards and below the converter.
About Converting Gigafarads to Nanofarads
Gigafarad and Nanofarad both belong to the electricity family — voltage, current, resistance, power, or energy — units that show up constantly when working across the different standards used by household wiring (120V/240V depending on region), automotive electrical systems (12V/24V), and electronics design. Specifically: Gigafarad is 1000000000 farad units, and nanofarad is 1e-9 farad units.
Formula
nanofarads = gigafarads × 1e+18
This factor comes from each unit's defined relationship to the category's base unit: 1 gigafarad equals 1000000000 base units, and 1 nanofarad equals 1e-9 base units, so dividing one by the other gives the direct gigafarad-to-nanofarad factor of 1e+18.
Simple example
1 GF × 1e+18 = 1e+18 nF
1 gigafarad = 1e+18 nanofarads.
Real-world example
120 GF × 1e+18 = 1.2e+20 nF
120 gigafarads = 1.2e+20 nanofarads.
Conversion table
| Gigafarad (GF) | Nanofarad (nF) |
|---|---|
| 1 GF | 1e+18 nF |
| 5 GF | 5e+18 nF |
| 12 GF | 1.2e+19 nF |
| 24 GF | 2.4e+19 nF |
| 120 GF | 1.2e+20 nF |
| 240 GF | 2.4e+20 nF |
Reverse conversion: Nanofarad to Gigafarad
1e+18 nF × 1e-18 = 1 GF
1e+18 nanofarads = 1 gigafarads.
gigafarads = nanofarads × 1e-18
For a page dedicated to this direction, see Nanofarad to Gigafarad.
Understanding the Gigafarad (GF)
Gigafarad is 1000000000 farad units.
Understanding the Nanofarad (nF)
Nanofarad is 1e-9 farad units.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many nanofarads are in 1 gigafarad?
1 gigafarad equals 1e+18 nanofarads, using the exact defined conversion factor rather than an estimate.
How do I convert gigafarad to nanofarad?
Multiply the gigafarad value by 1e+18. The converter above does this instantly to whatever precision you set.
How do I convert nanofarad back to gigafarad?
Use the reverse factor: 1 nanofarad equals 1e-18 gigafarads. You can also use the swap control in the converter above to flip the direction instantly.
What is a gigafarad?
Gigafarad (GF) is a unit of electricity.
What is a nanofarad?
Nanofarad (nF) is a unit of electricity.
Is the gigafarad to nanofarad conversion exact?
Yes. Both gigafarad and nanofarad are defined by fixed standards rather than physical artifacts, so the factor of 1e+18 used above is exact to as many digits as you choose to display.
What's the difference between voltage, current, and resistance?
Voltage (volts) is the electrical potential difference driving current through a circuit. Current (amperes) is the rate of flow of electric charge. Resistance (ohms) is how much a component opposes that flow. They're related by Ohm's law (V = I × R), but they are distinct physical quantities, and this page converts between units of just one of them.