Volumetric flow rate.
Bushels per Millisecond to Liter per Seconds Converter — bu/ms to L/s
Convert Bushel per Millisecond (bu/ms) to Liter per Seconds (L/s) using the exact conversion factor (1 bushel per millisecond = 35,239.07017 liter per seconds). See the formula, worked examples, conversion table, and common uses.
Bushels per Millisecond to Liter per Seconds converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 35.23907017 / 0.001.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Bushels per Millisecond to Liter per Seconds
Bushel per Millisecond and Liter per Seconds both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Both are volumetric flow rate units.
Formula
liter per seconds = bushels per millisecond × 35239.0701669
This factor comes from each unit's defined relationship to the category's base unit: 1 bushel per millisecond equals 35.2390701669 base units, and 1 liter per seconds equals 0.001 base units, so dividing one by the other gives the direct bushel per millisecond-to-liter per seconds factor of 35239.0701669.
Simple example
1 bu/ms × 35239.07017 = 35,239.07017 L/s
1 bushel per millisecond = 35,239.07017 liter per seconds.
Real-world example
60 bu/ms × 35239.07017 = 2,114,344.21 L/s
60 bushels per millisecond = 2,114,344.21 liter per seconds.
Conversion table
| Bushel per Millisecond (bu/ms) | Liter per Seconds (L/s) |
|---|---|
| 0.1 bu/ms | 3,523.907017 L/s |
| 1 bu/ms | 35,239.07017 L/s |
| 10 bu/ms | 352,390.7017 L/s |
| 60 bu/ms | 2,114,344.21 L/s |
| 100 bu/ms | 3,523,907.017 L/s |
| 1,000 bu/ms | 35,239,070.17 L/s |
Reverse conversion: Liter per Seconds to Bushel per Millisecond
1 L/s × 0.00002837759326 = 0.0000283776 bu/ms
1 liter per seconds = 0.0000283776 bushels per millisecond.
bushels per millisecond = liter per seconds × 0.0000283775932584
For a page dedicated to this direction, see Liter per Seconds to Bushel per Millisecond.
Understanding the Bushel per Millisecond (bu/ms)
Volumetric flow rate.
Understanding the Liter per Seconds
Liter per Seconds (L/s) measures volumetric flow rate. One liter of volume passing a point every second — used for larger flows than liter-per-minute conveniently describes. It is classified as a metric derived flow-rate unit.
Where it's used: Common in municipal water-utility and industrial flow specifications internationally
L/s vs. L/min. Both measure the same quantity at different time scales; 1 L/s equals 60 L/min. L/s is typically used for larger, continuous industrial or utility flows, while L/min suits smaller household-scale flows.
Uses of the Liter per Seconds today
- Municipal water supply and treatment plant flow rates
- Industrial process flow specifications
- Stream and river discharge measurement at moderate scales
Liter per Seconds — sources
- BIPM SI Brochure — Litre and second as accepted units used together to express flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many liter per seconds are in 1 bushel per millisecond?
1 bushel per millisecond equals 35,239.07017 liter per seconds, using the exact defined conversion factor rather than an estimate.
How do I convert bushel per millisecond to liter per seconds?
Multiply the bushel per millisecond value by 35239.07017. The converter above does this instantly to whatever precision you set.
How do I convert liter per seconds back to bushel per millisecond?
Use the reverse factor: 1 liter per seconds equals 0.0000283776 bushels per millisecond. You can also use the swap control in the converter above to flip the direction instantly.
What is a bushel per millisecond?
Bushel per Millisecond (bu/ms) is a unit of flow rate.
What is a liter per seconds?
Liter per Seconds (L/s) measures volumetric flow rate. One liter of volume passing a point every second — used for larger flows than liter-per-minute conveniently describes. It is classified as a metric derived flow-rate unit.
Is the bushel per millisecond to liter per seconds conversion exact?
Yes. Both bushel per millisecond and liter per seconds are defined by fixed standards rather than physical artifacts, so the factor of 35239.07017 used above is exact to as many digits as you choose to display.
What is the difference between l/s vs. l/min?
Both measure the same quantity at different time scales; 1 L/s equals 60 L/min. L/s is typically used for larger, continuous industrial or utility flows, while L/min suits smaller household-scale flows.