Volumetric flow rate.
Liter per Seconds to Bushels per Millisecond Converter — L/s to bu/ms
Convert Liter per Seconds (L/s) to Bushel per Millisecond (bu/ms) using the exact conversion factor (1 liter per seconds = 0.0000283776 bushel per millisecond). See the formula, worked examples, conversion table, and common uses.
Liter per Seconds to Bushels per Millisecond converter
Converter
Flow Rate Converter
Convert volumetric flow rates across metric, US, imperial, industrial, and scientific units.
Context values
Some unit families need one extra value for a physically accurate result.
Volumetric flow rate.
Result = input x 0.001 / 35.23907017.
Flow rate uses cubic meters per second as the base unit.
Reserved above the conversion cards and below the converter.
About Converting Liter per Seconds to Bushels per Millisecond
Liter per Seconds and Bushel per Millisecond both measure volumetric flow rate — how much volume passes a point over time — used to size pipes and pumps, monitor river or stream discharge, control industrial processes, and set medical infusion rates. Liter per Seconds is most often used for municipal water supply and treatment plant flow rates.
Formula
bushels per millisecond = liter per seconds × 0.0000283775932584
This factor comes from each unit's defined relationship to the category's base unit: 1 liter per seconds equals 0.001 base units, and 1 bushel per millisecond equals 35.2390701669 base units, so dividing one by the other gives the direct liter per seconds-to-bushel per millisecond factor of 0.0000283775932584.
Simple example
1 L/s × 0.00002837759326 = 0.0000283776 bu/ms
1 liter per seconds = 0.0000283776 bushels per millisecond.
Real-world example
60 L/s × 0.00002837759326 = 0.0017026556 bu/ms
60 liter per seconds = 0.0017026556 bushels per millisecond.
Conversion table
| Liter per Seconds (L/s) | Bushel per Millisecond (bu/ms) |
|---|---|
| 0.1 L/s | 0.0000028378 bu/ms |
| 1 L/s | 0.0000283776 bu/ms |
| 10 L/s | 0.0002837759 bu/ms |
| 60 L/s | 0.0017026556 bu/ms |
| 100 L/s | 0.0028377593 bu/ms |
| 1,000 L/s | 0.0283775933 bu/ms |
Reverse conversion: Bushel per Millisecond to Liter per Seconds
0.0000283776 bu/ms × 35239.07017 = 1.000000238 L/s
0.0000283776 bushels per millisecond = 1.000000238 liter per seconds.
liter per seconds = bushels per millisecond × 35239.0701669
For a page dedicated to this direction, see Bushel per Millisecond to Liter per Seconds.
Understanding the Liter per Seconds
Liter per Seconds (L/s) measures volumetric flow rate. One liter of volume passing a point every second — used for larger flows than liter-per-minute conveniently describes. It is classified as a metric derived flow-rate unit.
Where it's used: Common in municipal water-utility and industrial flow specifications internationally
L/s vs. L/min. Both measure the same quantity at different time scales; 1 L/s equals 60 L/min. L/s is typically used for larger, continuous industrial or utility flows, while L/min suits smaller household-scale flows.
Uses of the Liter per Seconds today
- Municipal water supply and treatment plant flow rates
- Industrial process flow specifications
- Stream and river discharge measurement at moderate scales
Understanding the Bushel per Millisecond (bu/ms)
Volumetric flow rate.
Liter per Seconds — sources
- BIPM SI Brochure — Litre and second as accepted units used together to express flow rate.
Reserved between the cards and the FAQ so the page stays balanced.
Frequently asked questions
How many bushels per millisecond are in 1 liter per seconds?
1 liter per seconds equals 0.0000283776 bushels per millisecond, using the exact defined conversion factor rather than an estimate.
How do I convert liter per seconds to bushel per millisecond?
Multiply the liter per seconds value by 0.00002837759326. The converter above does this instantly to whatever precision you set.
How do I convert bushel per millisecond back to liter per seconds?
Use the reverse factor: 1 bushel per millisecond equals 35,239.07017 liter per seconds. You can also use the swap control in the converter above to flip the direction instantly.
What is a liter per seconds?
Liter per Seconds (L/s) measures volumetric flow rate. One liter of volume passing a point every second — used for larger flows than liter-per-minute conveniently describes. It is classified as a metric derived flow-rate unit.
What is a bushel per millisecond?
Bushel per Millisecond (bu/ms) is a unit of flow rate.
Is the liter per seconds to bushel per millisecond conversion exact?
Yes. Both liter per seconds and bushel per millisecond are defined by fixed standards rather than physical artifacts, so the factor of 0.00002837759326 used above is exact to as many digits as you choose to display.
What is the difference between l/s vs. l/min?
Both measure the same quantity at different time scales; 1 L/s equals 60 L/min. L/s is typically used for larger, continuous industrial or utility flows, while L/min suits smaller household-scale flows.
Where is the liter per seconds still used today?
Common in municipal water-utility and industrial flow specifications internationally